Datasheet4U Logo Datasheet4U.com

FSA660 - 2:1 MIPI C-PHY (5.7 Gbps) 1-Data Lane Switch

General Description

The FSA660 is a one-data-lane MIPI, C-PHY switch.

This Single-Pole, Double-Throw (SPDT) switch is optimized for switching between two high-speed or lowpower MIPI sources.

The FSA660 is designed for the MIPI specification and allows connection to a CSI or DSI module.

Smart phones

Key Features

  • Switch Type: SPDT(3x).
  • Signal Types: - MIPI, C-PHY.
  • VCC: 1.5 to 5.0 V.
  • Input Signals: 0 to 2.1 V.
  • RON: 5.4 Ω Typical.
  • ΔRON: 0.1 Ω Typical.
  • RON_FLAT: 0.9 Ω Typical.
  • ICCZ:1 µA Maximum.
  • ICC: 12 µA Typical.
  • OIRR : -28 dB Typical.
  • Bandwidth: 5G Hz Typical.
  • IL: -1.0 dB Typical.
  • Xtalk: -44 dB Typical.
  • CON: 0.8 pF Typical.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSA634 2:1 MIPI D-PHY 4Data Lane Switch ON Semiconductor
FSA642 High-Speed MIPI Switch ON Semiconductor
FSA646 2:1 MIPI D-PHY (2.5Gpbs) 4-Data Lane Switch ON Semiconductor
FSA646A 2:1 MIPI D-PHY 4-Data-Lane & C-PHY 3-Data-Lane Switch ON Semiconductor
FSA07N60A N-Channel MOSFET IPS

Other Datasheets by Fairchild (onsemi)

Part Number Description
FSA66 Low-Voltage UHS Single SPST Normally Open Analog Switch
FSA66 Low-Voltage UHS Single SPST Normally Open Analog Switch
FSA6157 Negative-Swing Audio or Video Switch
FSA6157T Negative-Swing Audio or Video Switch
FSA641 2:1 MIPI Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSA660 — 2:1 MIPI C-PHY (5.7 Gbps) 1-Data Lane Switch September 2016 FSA660—2:1 MIPI C-PHY (5.7 Gbps) 1-Data Lane Switch Features  Switch Type: SPDT(3x)  Signal Types: - MIPI, C-PHY  VCC: 1.5 to 5.0 V  Input Signals: 0 to 2.1 V  RON: 5.4 Ω Typical  ΔRON: 0.1 Ω Typical  RON_FLAT: 0.9 Ω Typical  ICCZ:1 µA Maximum  ICC: 12 µA Typical  OIRR : -28 dB Typical  Bandwidth: 5G Hz Typical  IL: -1.0 dB Typical  Xtalk: -44 dB Typical  CON: 0.8 pF Typical Description The FSA660 is a one-data-lane MIPI, C-PHY switch. This Single-Pole, Double-Throw (SPDT) switch is optimized for switching between two high-speed or lowpower MIPI sources. The FSA660 is designed for the MIPI specification and allows connection to a CSI or DSI module.