Datasheet4U Logo Datasheet4U.com

DGD0506A - HIGH FREQUENCY HALF-BRIDGE GATE DRIVER

General Description

The DGD0506A is a high-frequency half-bridge gate driver capable of driving N-channel MOSFETs in a half-bridge configuration.

The floating high-side driver is rated up to 50V.

The DGD0506A logic inputs are compatible with standard TTL and CMOS levels (down to 3.3V) to interface easily with MCUs.

Key Features

  • 50V Floating High-Side Driver.
  • Drives Two N-Channel MOSFETs in a Half-Bridge Configuration.
  • 1.5A Source / 2.0A Sink Output Current Capability.
  • Internal Bootstrap Diode Included.
  • Undervoltage Lockout for High-Side and Low-Side Drivers.
  • Programmable Deadtime to Protect MOSFETs.
  • Logic Input (IN and EN) 3.3V Capability.
  • Ultra Low Standby Currents (.

📥 Download Datasheet

Full PDF Text Transcription for DGD0506A (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for DGD0506A. For precise diagrams, and layout, please refer to the original PDF.

Description The DGD0506A is a high-frequency half-bridge gate driver capable of driving N-channel MOSFETs in a half-bridge configuration. The floating high-side driver is...

View more extracted text
SFETs in a half-bridge configuration. The floating high-side driver is rated up to 50V. The DGD0506A logic inputs are compatible with standard TTL and CMOS levels (down to 3.3V) to interface easily with MCUs. UVLO for high-side and low-side will protect a MOSFET with loss of supply. To protect MOSFETs, cross conduction prevention logic prevents the HO and LO outputs being on at the same time. Fast and well-matched propagation delays allow a higher switching frequency, enabling a smaller, more compact power switching design using smaller associated components. The DGD0506A is offered in the W-DFN3030-10 and MSOP-10 packages