Datasheet4U Logo Datasheet4U.com

DGD05463 - HIGH FREQUENCY HALF-BRIDGE GATE DRIVER

General Description

The DGD05463 is a high-frequency half-bridge gate driver capable of driving n-channel MOSFETs in a half-bridge configuration.

The floating high-side driver is rated up to 50V.

The DGD05463 logic inputs are compatible with standard TTL and CMOS levels (down to 3.3V) to interface easily with MCUs.

Key Features

  • 50V Floating High-Side Driver.
  • Drives Two N-Channel MOSFETs in a Half-Bridge Configuration.
  • 1.5A Source / 2.5A Sink Output Current Capability.
  • Internal Bootstrap Diode Included.
  • Undervoltage Lockout for High-Side and Low-Side Drivers.
  • Programmable Deadtime to Protect MOSFETs.
  • Logic Input (IN and EN) 3.3V Capability.
  • Ultra-Low Standby Currents (< 1µA).
  • Extended Temperature Range: -40°C to +125°C.
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Diodes Incorporated

Part Number Description
DGD0547 HIGH FREQUENCY HIGH-SIDE AND LOW-SIDE GATE DRIVER
DGD05473 HIGH FREQUENCY HIGH-SIDE AND LOW-SIDE GATE DRIVER
DGD0503 HALF-BRIDGE GATE DRIVER
DGD0504 HALF-BRIDGE GATE DRIVER
DGD0506 HIGH FREQUENCY HALF-BRIDGE GATE DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DGD05463 HIGH-FREQUENCY HALF-BRIDGE GATE DRIVER WITH PROGRAMMABLE DEADTIME Description The DGD05463 is a high-frequency half-bridge gate driver capable of driving n-channel MOSFETs in a half-bridge configuration. The floating high-side driver is rated up to 50V. The DGD05463 logic inputs are compatible with standard TTL and CMOS levels (down to 3.3V) to interface easily with MCUs. UVLO for high-side and low-side will protect a MOSFET with loss of supply. To protect MOSFETs, cross conduction prevention logic prevents the HO and LO outputs from being on at the same time. Fast and well-matched propagation delays allow a higher switching frequency, which enable a smaller, more compact power switching design using smaller associated components.