Datasheet4U Logo Datasheet4U.com

CYUSB3035 - FX3S SuperSpeed USB Controller

Description

16 Absolute Maximum Ratings 20 Operating Conditions 20 AC Timing Parameters 22 GPIF II Timing 22 Asynchronous SRAM Timing 25 ADMux Timing for Asynchronous Access 28 Synchronous ADMux Timing 30 Slave FIFO Interface 33 Synchronous Slave FIFO Write Sequence Description 34 Asynchronous Slave FIFO Read S

Features

  • Universal serial bus (USB) integration.
  • USB 3.0 and USB 2.0 peripherals compliant with USB 3.0 specification 1.0.
  • 5-Gbps USB 3.0 PHY compliant with PIPE 3.0.
  • High-speed On-The-Go (HS-OTG) host and peripheral compliant with OTG Supplement Version 2.0.
  • Thirty-two physical endpoints.
  • Support for battery charging Spec 1.1 and accessory charger adaptor (ACA) detection General Programmable Interface (GPIF™ II).
  • Programmable 100-MHz GPIF II enables connectivi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CYUSB3011 SuperSpeed USB Controller Cypress
CYUSB3011 SuperSpeed USB Controller Infineon
CYUSB3012 SuperSpeed USB Controller Cypress
CYUSB3012 SuperSpeed USB Controller Infineon
CYUSB3013 SuperSpeed USB Controller Cypress

Other Datasheets by Cypress (Infineon)

Part Number Description
CYUSB3031 FX3S SuperSpeed USB Controller
CYUSB3033 FX3S SuperSpeed USB Controller
CYUSB3023 USB and Mass Storage Peripheral Controller
CYUSB3025 USB and Mass Storage Peripheral Controller
CYUSB3064 MIPI CSI-2 to SuperSpeed USB Bridge Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CYUSB3035 EZ-USB® FX3S SuperSpeed USB Controller Features ■ ■ Universal serial bus (USB) integration ❐ USB 3.0 and USB 2.0 peripherals compliant with USB 3.0 specification 1.0 ❐ 5-Gbps USB 3.0 PHY compliant with PIPE 3.0 ❐ High-speed On-The-Go (HS-OTG) host and peripheral compliant with OTG Supplement Version 2.0 ❐ Thirty-two physical endpoints ❐ Support for battery charging Spec 1.1 and accessory charger adaptor (ACA) detection General Programmable Interface (GPIF™ II) ❐ Programmable 100-MHz GPIF II enables connectivity to a wide range of external devices ❐ 8- and 16-bit data bus ❐ As many as 16 configurable control signals Mass storage support ❐ SD 3.0 (SDXC) UHS-1 ❐ eMMC 4.
Published: |