900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Cypress Semiconductor Electronic Components Datasheet

CY7C1563XV18 Datasheet

72-Mbit QDR II+ Xtreme SRAM Four-Word Burst Architecture

No Preview Available !

CY7C1563XV18/CY7C1565XV18
72-Mbit QDR® II+ Xtreme SRAM Four-Word
Burst Architecture (2.5 Cycle Read Latency)
72-Mbit QDR® II+ Xtreme SRAM Four-Word Burst Architecture (2.5 Cycle Read Latency)
Features
Separate Independent Read and Write Data Ports
Supports concurrent transactions
633 MHz Clock for High Bandwidth
Four-word Burst for Reducing Address Bus Frequency
Double Data Rate (DDR) Interfaces on both Read and Write
Ports (data transferred at 1266 MHz) at 633 MHz
Available in 2.5 Clock Cycle Latency
Two Input Clocks (K and K) for precise DDR Timing
SRAM uses rising edges only
Echo Clocks (CQ and CQ) simplify Data Capture in High Speed
Systems
Data Valid Pin (QVLD) to indicate Valid Data on the Output
Single Multiplexed Address Input Bus latches Address Inputs
for Read and Write Ports
Separate Port selects for Depth Expansion
Synchronous Internally Self-timed Writes
QDR® II+ Xtreme operates with 2.5 cycle read latency when
DOFF is asserted HIGH
Operates similar to QDR I Device with one Cycle Read Latency
when DOFF is asserted LOW
Available in × 18 and × 36 Configurations
Full Data Coherency, providing Most Current Data
Core VDD = 1.8 V± 0.1 V; I/O VDDQ = 1.4 V to 1.6 V
Supports 1.5 V I/O supply
HSTL Inputs and Variable Drive HSTL Output Buffers
Available in 165-ball FBGA Package (13 × 15 × 1.4 mm)
Offered in Pb-free Packages
JTAG 1149.1 compatible Test Access Port
Phase-Locked Loop (PLL) for Accurate Data Placement
Configurations
With Read Cycle Latency of 2.5 cycles:
CY7C1563XV18 – 4M × 18
CY7C1565XV18 – 2M × 36
Functional Description
The CY7C1563XV18, and CY7C1565XV18 are 1.8 V
Synchronous Pipelined SRAMs, equipped with QDR II+
architecture. Similar to QDR II architecture, QDR II+ architecture
consists of two separate ports: the read port and the write port to
access the memory array. The read port has dedicated data
outputs to support read operations and the write port has
dedicated data inputs to support write operations. QDR II+
architecture has separate data inputs and data outputs to
completely eliminate the need to “turnaround” the data bus that
exists with common I/O devices. Each port is accessed through
a common address bus. Addresses for read and write addresses
are latched on alternate rising edges of the input (K) clock.
Accesses to the QDR II+ read and write ports are completely
independent of one another. To maximize data throughput, both
read and write ports are equipped with DDR interfaces. Each
address location is associated with four 18-bit words
(CY7C1563XV18), or 36-bit words (CY7C1565XV18) that burst
sequentially into or out of the device. Because data is transferred
into and out of the device on every rising edge of both input
clocks (K and K), memory bandwidth is maximized while
simplifying system design by eliminating bus “turnarounds”.
Depth expansion is accomplished with port selects, which
enables each port to operate independently.
All synchronous inputs pass through input registers controlled by
the K or K input clocks. All data outputs pass through output
registers controlled by the K or K input clocks. Writes are
conducted with on-chip synchronous self-timed write circuitry.
For a complete list of related documentation, click here.
Selection Guide
Maximum Operating Frequency
Maximum Operating Current
Description
633 MHz 600 MHz Unit
633 600 MHz
× 18 1165
1100
mA
× 36 1660
1570
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-70205 Rev. *F
• San Jose, CA 95134-1709 • 408-943-2600
Revised July 7, 2016


Cypress Semiconductor Electronic Components Datasheet

CY7C1563XV18 Datasheet

72-Mbit QDR II+ Xtreme SRAM Four-Word Burst Architecture

No Preview Available !

CY7C1563XV18/CY7C1565XV18
Logic Block Diagram – CY7C1563XV18
D[17:0]
18
A(19:0) 20
Address
Register
Write Write Write Write
Reg Reg Reg Reg
Address
Register
20 A(19:0)
K
K
DOFF
VREF
WPS
BWS[1:0]
CLK
Gen.
Control
Logic
Read Data Reg.
72
36
36
Control
Logic
RPS
Reg.
Reg.
Reg. 18
18
18
18
18
CQ
CQ
Q[17:0]
QVLD
Logic Block Diagram – CY7C1565XV18
D[35:0]
36
A(18:0) 19
Address
Register
Write Write Write Write
Reg Reg Reg Reg
Address
Register
19 A(18:0)
K
K
DOFF
VREF
WPS
BWS[3:0]
CLK
Gen.
Control
Logic
Read Data Reg.
144
72
72
Control
Logic
RPS
Reg.
Reg.
Reg. 36
36
36
36
36
CQ
CQ
Q[35:0]
QVLD
Document Number: 001-70205 Rev. *F
Page 2 of 29


Part Number CY7C1563XV18
Description 72-Mbit QDR II+ Xtreme SRAM Four-Word Burst Architecture
Maker Cypress Semiconductor
PDF Download

CY7C1563XV18 Datasheet PDF






Similar Datasheet

1 CY7C1563XV18 72-Mbit QDR II+ Xtreme SRAM Four-Word Burst Architecture
Cypress Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy