Datasheet4U Logo Datasheet4U.com

CY2313ANZ - 3.3V SDRAM Buffer for Desktop PCs with 3 DIMMs

General Description

The CY2313ANZ is a 3.3V buffer designed to distribute high-speed clocks in desktop PC applications.

The part has 13 outputs, 12 of which can be used to drive up to three SDRAM DIMMs, and the remaining can be used for external feedback to a PLL.

Key Features

  • One input to 13 output buffer/driver.
  • Supports up to three SDRAM DIMMs.
  • One additional outputs for feedback.
  • Serial interface for output control.
  • Low skew outputs.
  • Up to 100-MHz operation.
  • Multiple VDD and VSS pins for noise reduction.
  • Low EMI outputs.
  • 28-pin SOIC (300-mil) package.
  • 3.3V operation Functional.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CY2304 3.3V Zero Delay Buffer Cypress
CY2304NZ Four Output PCI-X and General Purpose Buffer Cypress
CY2305 Low Cost 3.3 V Zero Delay Buffer Cypress
CY2308 3.3V Zero Delay Buffer Cypress
CY2309 Low Cost 3.3 V Zero Delay Buffer Cypress

Other Datasheets by Cypress (Infineon)

Part Number Description
CY2318ANZ 3.3V SDRAM Buffer for Desktop PCs with 4 DIMMs
CY2318BNZ 3.3V SDRAM Buffer for Desktop PCs with 4 DIMMs
CY2300 Phase-Aligned Clock Multiplier
CY2302 Frequency Multiplier and Zero Delay Buffer
CY2303 Phase-Aligned Clock Multiplier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 0NZCY2310 13ANZ CY2313ANZ 13 Output, 3.3V SDRAM Buffer for Desktop PCs with 3 DIMMs Features • One input to 13 output buffer/driver • Supports up to three SDRAM DIMMs • One additional outputs for feedback • Serial interface for output control • Low skew outputs • Up to 100-MHz operation • Multiple VDD and VSS pins for noise reduction • Low EMI outputs • 28-pin SOIC (300-mil) package • 3.3V operation Functional Description The CY2313ANZ is a 3.3V buffer designed to distribute high-speed clocks in desktop PC applications. The part has 13 outputs, 12 of which can be used to drive up to three SDRAM DIMMs, and the remaining can be used for external feedback to a PLL. The device operates at 3.