PN7106A Datasheet | Chipown

Description The PN7106A/B is a high voltage, high speed power MOSFET and IGBT driver based on P_SUB P_EPI process. The floating channel driver can be used to drive two N-channel power MOSFET or IGBT in a half-bridge configuration (version B) or any other high-side + low-side configuration (version A) which operates up to 600V. Logic inputs are patible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. Applications z Small and medium-power motor driver z Power MOSFET or IGBT driver z Lighting ballast z Half-Bridge Power Converters z Full-Bridge Power Converters z Any plementary Drive Converters (Asymmetrical Half-Bridge, Active Clamp) (A Version Only) Chipown High and Low Side Driver Features z Fully operational to +600 V z 3.3 V logic patible z d V/dt Immunity ±50 V/ns z Floating channel designed for bootstrap operation z Gate drive supply range from 10 V to 20 V z UVLO for both channels z Output Source / Sink Current Capability 450m A / 950m A z Independent Logic Inputs to Acmodate All Topologies (Version A) z Cross Conduction Protection with 100 ns Internal Fixed Dead Time (Version B) z -5V negative Vs ability z Pin-to-Pin patible with Industry Standards z Matched propagation delay for both channels z 8-Lead PDIP or 8-Lead SOIC package Package Typical Application Circuit Figure1. Typical Application Resonant Converter (LLC type) 13/F, Building C, No. 4 Longshan Wangzhuang Technology Innovation Center, New District, Wuxi, Jiangsu Province,China 214028 PN7106A/B Chipown Figure2. Typical Application Half Bridge Converter Pin Description PIN NO. 1 2 3 4 5 6 7 8 PIN NAME VCC IN_HI IN_LO GND DRV_LO BRIDGE DRV_HI VBOOT PIN FUNCTION Low side and main power supply Logic input for high side gate driver output (HO), in phase Logic input for low side gate driver output (LO), in...