Datasheet4U Logo Datasheet4U.com

BCT4221 - USB2.0 Hi-Speed Switches

General Description

The BCT4221 is a high bandwidth, fast double-pole double-throw (DPDT) analog switch.

Its wide bandwidth and low bit-to-bit skew allow it to pass high-speed differential signals with good signal integrity.

Key Features

  • VCC Operating Range: 2.7V-5.5V.
  • Analog Signal Range: 0 to VCC.
  • -3dB Bandwidth: 720MHz.
  • Off Isolation:-38dB @250MHz.
  • Crosstalk Rejection:- 38dB @250MHz.
  • ON-Resistance:6Ω Typical.
  • Extended Temperature Range:.
  • 40°C to 85°C.
  • Green QFN2.0X1.5-10L packages.
  • ESD:HBM 8000V.

📥 Download Datasheet

Datasheet Details

Part number BCT4221
Manufacturer BROADCHIP
File Size 283.43 KB
Description USB2.0 Hi-Speed Switches
Datasheet download datasheet BCT4221 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BCT10-S30-UP6X2-H1151 Capacitive sensor Turck
BCT10-S30-UP6X2T-H1151 Capacitive sensor Turck
BCT5-S18-UN6X2T-H1151 Capacitive sensor Turck
BCT5-S18-UP6X2T-H1151 Capacitive sensor Turck
BCT72328 LED Driver BlueChips

Other Datasheets by BROADCHIP

Part Number Description
BCT4222A High-Speed DPDT Analog Switch
BCT4222B 350MHz DPDT Analog Switch
BCT4222C High-Speed DPDT Analog Switch
BCT4223 Dual-SPDT Analog Switch
BCT4224 USB2.0 High-Speed 4:1 Mux/DeMux Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BCT4221 USB2.0 Hi-Speed Switches BCT4221 USB2.0 Hi-Speed Switches GENERAL DESCRIPTION The BCT4221 is a high bandwidth, fast double-pole double-throw (DPDT) analog switch. Its wide bandwidth and low bit-to-bit skew allow it to pass high-speed differential signals with good signal integrity. Each switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. Industry-leading advantages include a propagation delay of less than 250ps, resulting from its low channel resistance and low I/O capacitance. Its high channel-to-channel crosstalk rejection results in minimal noise interference. The BCT4221 is available in Green QFN2.0X1.5-10L packages. It operates over an ambient temperature range of -40°C to +85°C. FEATURES  VCC Operating Range: 2.7V-5.