ACB-12-1931 Datasheet | Applied Concepts

DESCRIPTION The ACB-12-1931 is designed to power 6 CCFLs to a nominal power level of 32.4 Watts from an input voltage of +12V. Intensity control is acplished by the user providing a variable DC voltage level at pin 7 of CON1. A DC reference voltage (+5V) is available at pin 6 of CON1 for external use. Enable control is acplished at pin 5 of CON1. All outputs are open and short circuit protected. MECHANICAL/ENVIRONMENTAL Weight = 116 grams Altitude = 10,000 ft max. Humidity < 85% non-condensing Size (L x W x H) = 9.48 IN x 2.55 IN x 0.675 IN PCB thickness = 0.062 IN Mounting Holes = 0.120 IN diameter (X6) Input Power & Control Connector = CON1 CCFL Output Connectors = CON2 - CON7 .. Page 1 of 2 397 Route 281 - P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: sales@acipower. .acipower. PRODUCT DATA SHEET 05/05/10 MAXIMUM RATINGS- Symbol Vin Vip Iop Pin Top Tstg Parameter Supply Voltage (Referenced to Ground) Voltage applied to any Input Pin (Referenced to Ground) Current sourced or sinked from any Output Pin Input Power (DC Input Voltage x DC Input Current) Operating Temperature (Still air ambient around Inverter) Storage Temperature Value -0.7 to 14 -0.7 to 5.7 +/- 10 43.5 -20 to +70 -40 to +105 Unit Vdc Vdc m Adc W °C °C - Maximum Ratings are those values beyond which damage to the inverter may occur REMENDED OPERATING CONDITIONS Symbol Vin Lsv Vcntl Parameter Supply Voltage (Referenced to Ground) Cold Cathode Fluorescent Lamp Sustaining Voltage Intensity Control Voltage Min 10.8 747 0 Max 13.2 913 5.0 Unit Vdc Vrms Vdc ELECTRICAL CHARACTERISTICS Vin = +12.0V, Lsv = 830Vrms, Vcntl = +5.0V, Enable = +5V unless otherwise specified Symbol Parameter Test Conditions Min Lstart Lamp Starting Voltage Open Circuit 1730 Lout Lamp Output Current 5.85 Lfreq Lamp-Current Frequency 27.9 Pfreq PWM Dimming Frequency Vcntl (Pin 7)= +2.5V 95 Pdc PWM Duty Cycle Range Vcntl (Pin 7)= 0 to +5.0V 0 ENoff Enable Control, unit OFF...