AAT3103 - 3-Channel Charge-Pump LED Driver

Product Overview

Advanced Analog Technology

Part number	AAT3103
Manufacturer	Advanced Analog Technology
File Size	1.08 MB
Description	3-Channel Charge-Pump LED Driver
Datasheet	AAT3103 Datasheet
Additional preview pages of the AAT3103 datasheet.

The AAT3103 is a constant frequency charge-pump based current-source white LED driver capable of driving one to three LEDs up to 30mA, each.

Source WLED Driver, up to 3 LEDs at up to 30mA, each Automatic Switching Between 1x and 2x Modes 900KHz Switching Frequency Linear LED Output Current Control.
Single-wire, S2Cwire Interface AAT3103-1: 16-step AAT3103-2: 8-step ON/OFF or PWM Interface.
AAT3103-4 ±10% LED Output Current Accuracy ±3% LED Output Current Matching Low-current Shutdown Mode Built-in Short Circuit and Thermal Protection Automatic Soft-start 2x2.1mm SC70JW-10 Package.

📁 Similar Datasheet

AAT3104 - Low Cost 1x/2x 4 Channel Charge Pump WLED Driver (Advanced Analogic Technologies)
AAT3105 - Low Cost 1x/2x Four-Channel Charge Pump WLED Driver (Skyworks)
AAT3110 - MicroPower Regulated Charge Pump (Advanced Analogic Technologies)
AAT3111 - MicroPower Regulated Charge Pump (Advanced Analogic Technologies)
AAT3112 - High Efficiency Charge Pump (AAT)
AAT3113 - High Efficiency 1.5X Fractional Charge Pumps For White LED Applications (Advanced Analogic Technologies)
AAT3114 - High Efficiency 1.5X Fractional Charge Pumps (Skyworks Solutions)
AAT3114A - High Efficiency 1.5X Fractional Charge Pumps (AAT)

Other Datasheets by Advanced Analog Technology

Published: Nov 18, 2008 |