TPC116S4 Datasheet | 3PEAK

TPC116S4/TPC112S4 Quad 16-/12-Bit, Low-Power, High-Performance DACs Features - Quad, 16-/12-Bit Pin patible DACs TPC116S4: 16 bits TPC112S4: 12 bits - Low Power Consumption (800 μA typ) - Differential Nonlinearity: ±1 LSB (max) - Glitch Energy: 2 n V-s - Power-on Reset to Zero - Supply Range: 2.7 V to 5.5 V - Buffered Rail-to-rail Output Operation - Safe Power-on Reset (POR) to Zero DAC Output - Fast 30-MHz, 3-Wire, SPI/QSPI/MICROWIRE- patible Serial Interface - Schmitt-trigger Inputs for Direct Optocoupler Interface - SYNC Interrupt Facility - High-performance Drop-in patible with TLV5614 - Available in TSSOP-16 Package Applications - Gain and Offset Adjustment - Process Control and Servo Loops - Programmable Voltage and Current Sources - Programmable Attenuators - Automatic Test Equipment Description The TPC116S4/TPC112S4 are pin-patible 16bit and 12-bit digital-to-analog converters. These products are four-channel, low-power, buffered voltage-out DACs, which are guaranteed monotonic by design. These devices use a precision external reference applied through the high-resistance input for rail-to-rail operation and low system power consumption. The TPC116S4/TPC112S4 accept a wide range of 2.7 V to 5.5 V supply voltage. The parts incorporate a power-on reset circuit to ensure that the DAC output powers up to 0 V and remains there until a valid write takes place. The TPC116S4/TPC112S4 on-chip precision output amplifiers allow rail-to-rail output swing to be achieved. For remote sensing applications, the output amplifier’s inverting input is available to the user. The TPC116S4/TPC112S4 use a versatile 3wire serial interface that operate sat clock rating up to 30 MHz and are patible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The TPC116S4/TPC112S4 are available in a small-sized 16-pin TSSOP package, all packages are specified over the -40°C to +125°C extended industrial temperature range. Typical Application...