TPA6552 Datasheet | 3PEAK

TPA6551/TPA6552/TPA6554 5-V, 10-MHz GBWP, Low-Noise Op Amps Features Description - Supply Voltage: 2.5 V to 5.5 V or ±1.25 V to ±2.75 V - Offset Voltage: ±1.5 m V Maximum at 25°C - GBWP: 10 MHz, Slew Rate: 3 V/μs - Rail-to-Rail Input and Output - Low Noise: 10 n V/√Hz at 1 k Hz - Low 1/f Noise: 20 n V/√Hz at 10 Hz - Low Power: 1.5 m A Maximum per Channel - - 40°C to 125°C Operation Temperature Range Applications The TPA655x series op-amps are single, dual, and quad RRIO op-amps with low offset, low power, and stable highfrequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve 10-MHz bandwidth, 3-V/μs slew rate, and low distortion. The TPA655x series op-amps have 1-μVPP voltage noise at 0.1 Hz to 10 Hz, because the bipolar transistor in the input stagewith low 1/f noise is used as the input stage. Considering the requirement of the low standby power in some special applications, there is a shutdown function which is TPA6551N with only 0.5-μA shutdown current. - Audio Equipment - Instrumentation - Sensor Interface - Io T Device Typical Application Circuit .3peak. 1 / 30 AA20230301A1 TPA6551/TPA6552/TPA6554 5-V, 10-MHz GBWP, Low-Noise Op Amps Table of Contents Features ................................................................................................................................................................ 1 Applications......................................................................................................................................................... 1 Description........................................................................................................................................................... 1 Typical Application Circuit..................................................................................................................................1 Revision History.............................................................................................