http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Yobon
Yobon

YB1313 Datasheet Preview

YB1313 Datasheet

Charge Pump

No Preview Available !

YB1313 pdf
www.DataSheet4U.com
YB1313
1x/1.5x/2x Charge Pump for White LED Application
Description
The YB1313 charge pump is designed to drive
up to 5 white LEDs with regulated constant
current in back lit display application. The
device can provide up to 25 mA per LED for a
total of more than 125 mA. The input voltage
ranges from 2.7V to 5.5V and is ideal for
applications powered by a single LI-Ion or 3 to
4 NiCd, NiMH or Alkaline batteries.
The 1MHz fix-frequency switching allows for
tiny external components, and the regulation
scheme is optimized to ensure low EMI and
low input ripple.
Internal soft-start circuitry effectively reduces
the in-rush current. YB1313 also provides short
circuit protection, over-temperature protection
and over-voltage protection. In shutdown mode,
the shutdown current is less than 1μA. YB1313
is available in a TQFN-16 3x3 package.
Features
„ Input Range : 2.7V to 5.5V
„ Drives up to 5 LEDs at 25mA Each
„ 1MHz Internal Oscillator
„ Thermal Protection Shutdown
„ Output Short-circuit Current Limit and
Over-voltage Protection
„ Under-Voltage Lockout With Hysteresis
„ Automatic Soft-Start Reduces In-Rush
Current
„ Three Charge Pump Mode1x/1.5x/2x
„ 3mm x 3mm TQFN package
Applications
„ White LED Backlighting
„ Handheld PCs and PDAs
„ Mobile Phone
Typical Application Circuit
VIN = 2.7V
To 5.5V
1 µF
0. 47 µF
0. 47 µF
VIN VOUT
C1+
D1
C1- D2
C2+
D3
YB 1313
C2- D4
EN1
D5
EN2
GND
ISET
PGND
2.2uF
YB1313 MRev.1.1
Figure 1. Typical application circuit
www.yobon.com.tw
1




Yobon
Yobon

YB1313 Datasheet Preview

YB1313 Datasheet

Charge Pump

No Preview Available !

YB1313 pdf
www.DataSheet4U.com
Pin Configuration
YB1313
1x/1.5x/2x Charge Pump for White LED Application
TQFN-16 3x3 Package
12 11 10
13
VIN
14
GND
15
EN1
16
EN2
1234
9
VOUT
8
PGND
7
D1
6
D2
5
Pin Description
Table 1
Figure 2. Pin configuration
Pin Name
Description
1 ISET Connect a RSET resistor between this pin and GND. RSET=10K, set ILED to 20 mA (Recommanded)
2 D5 Current sink output #5. If not used, connected to VIN or floating
3 D4 Current sink output #4. If not used, connected to VIN or floating
4 D3 Current sink output #3. If not used, connected to VIN or floating
5 D2 Current sink output #2. If not used, connected to VIN or floating
6 D1 Current sink output #1. If not used, connected to VIN or floating
7 PGND Power GND
8 VOUT Charge pump output
9 C2+ Flying capacitor 2 positive terminal. Connect a 0.47μF capacitor between C2+ and C2-.
10 C1+ Flying capacitor 1 positive terminal. Connect a 0.47μF capacitor between C1+ and C1-
11 C1- Flying capacitor 1 negative terminal
12 C2- Flying capacitor 2 negative terminal
13 VIN Input Voltage
14 GND Analog GND
15 EN1 Enable input1
Enable input2. EN1 and EN2 can be used for digital dimming with 4 steps from 0mA to the maximum
16 EN2
current set with ISET.
Ordering Information
Table 2
Order Number
YB1313QF33
Package Type
TQFN 3X3
Supplied as
2500 units Tape & Reel
YB1313 MRev.1.1
www.yobon.com.tw
Package Marking
1313
2




Yobon
Yobon

YB1313 Datasheet Preview

YB1313 Datasheet

Charge Pump

No Preview Available !

YB1313 pdf
www.DataSheet4U.com
YB1313
1x/1.5x/2x Charge Pump for White LED Application
Absolute Maximum Ratings
Recommended Operating Conditions
y Supply Voltage.................................................. 6.5V
y Output Voltage.................................................. 5.5V
y Output Short-Circuit Duration................Continuous
y Junction Temperature Range ........................ +125
y Storage Temperature Range............-65to +150
y Lead Temperature ......................................... +250
y Input Supply Voltage ........................ 2.7V to 5.5V
y Operating Temperature................. -40to +85
Electrical Characteristics
Table 3 At TA=25, VIN=3.5V, CIN=1μF, C1=C2=0.47μF, COUT=2.2μF, EN1=EN2=VIN, unless otherwise noted.
SYMBOL
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
SUPPLY VOLTAGE AND CURRENT
VIN Input voltage range
2.7 5.5 V
1x
IQ Operating quiescent current
1.5x
800 μA
3 mA
ISD Shutdown current
VIN = 3.5V, EN1 = EN2 = 0V
1 μA
CHARGE PUMP STAGE
VOUT
Over-voltage limit
LED unconnected, VIN=4.2V
5.5 V
FOSC Switching frequency
0.6 0.8
1 MHz
ηCP
Charge pump efficiency
VIN = 3.5V, 1.5x mode
93 %
Shutdown temperature
Temperature rising
160
Recovery temperature
Temperature falling
140
CURRENT SINKS
k
ILED to ISET current ratio
EN1=EN2=1, RISET=10K
290 320 350
ΔILED/ILED(min)
ΔILED/ΔVIN
Current matching between any
two outputs2
VLED = 3.5V, TA = 25
Line regulation
2.7V < VIN < 4.3V
0.4 2.0
%
2.0 3.0 4.0 %/V
VISET
Reference voltage for current set
ENABLE 1, ENABLE 2
V (UVLO)
Under-Voltage Lockout
UVLO hysteresis
VIH EN1, EN2 Threshold high
VIL EN1, EN2 Threshold low
FPWM
Frequency range at PWM
EN1 = 1, EN2 = 0
EN1 = 0, EN2 = 1
EN1 = 1, EN2 = 1
Supply voltage falling
VIN = 5.5V
VIN = 2.7V
EN1, EN2 shorted for PWM control
200 mV
400 mV
600 620 640 mV
2.3 V
100 mV
1.6 V
0.4 V
0 5 kHz
YB1313 MRev.1.1
www.yobon.com.tw
3




Part Number YB1313
Description Charge Pump
Maker Yobon
Total Page 9 Pages
PDF Download
YB1313 pdf
Download PDF File
YB1313 pdf
View for Mobile






Related Datasheet

1 YB1313 Charge Pump Yobon
Yobon
YB1313 pdf
2 YB1315 High Efficiency Charge Pump White LED Driver YOBON TECHNOLOGIES
YOBON TECHNOLOGIES
YB1315 pdf
3 YB1316 Step-Up/ Step-Down / Fixed Output Application YOBON TECHNOLOGIES
YOBON TECHNOLOGIES
YB1316 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components