MEMS INERTIAL SENSOR:
3-axiswww.datasheet4u.com - +/-2g/6g ULTRACOMPACT LINEAR ACCELEROMETER
■ 2.4V TO 3.6V SINGLE SUPPLY OPERATION
■ LOW POWER CONSUMPTION
■ ±2g/±6g USER SELECTABLE FULL-SCALE
■ 0.5mg RESOLUTION OVER 100Hz
■ EMBEDDED SELF TEST
■ OUTPUT VOLTAGE, OFFSET AND
SENSITIVITY RATIOMETRIC TO THE
■ HIGH SHOCK SURVIVABILITY
■ ECO-PACK COMPLIANT
The LIS3L06AL is a low-power 3-axis linear
capacitive accelerometer that includes a sensing
element and an IC interface able to take the
information from the sensing element and to
provide an analog signal to the external world.
The sensing element, capable of detecting the
acceleration, is manufactured using a dedicated
process developed by ST to produce inertial
sensors and actuators in silicon.
The IC interface is manufactured using a standard
CMOS process that allows high level of integration
Temp range, °C
-40°C to +85°C
-40°C to +85°C
to design a dedicated circuit which is trimmed to
better match the sensing element characteristics.
The LIS3L06AL has a dynamically selectable full
scale of ±2g/±6g and it is capable of measuring
accelerations over a bandwidth of 1.5 kHz for all
axes. The device bandwidth may be reduced by
using external capacitances. A self-test capability
allows to check the mechanical and electrical
signal path of the sensor.
The LIS3L06AL is available in plastic SMD
package and it is guaranteed to operate over an
extended temperature range of -40°C to +85°C.
The LIS3L06AL belongs to a family of products
suitable for a variety of applications:
– Mobile terminals
– Gaming and Virtual Reality input devices
– Free-fall detection for data protection
– Antitheft systems and Inertial Navigation
– Appliance and Robotics.
Tape & Reel