http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





On-Bright Electronics
On-Bright Electronics

OB2269C Datasheet Preview

OB2269C Datasheet

Current Mode PWM Controller

No Preview Available !

OB2269C pdf
OB2269C
GENERAL DESCRIPTION
OB2269C is a highly integrated current mode PWM
control IC optimized for high performance, low
standby power and cost effective offline flyback
converter applications.
PWM switching frequency at normal operation is
externally programmable and trimmed to tight range.
At no load or light load condition, the IC operates in
extended ‘burst mode’ to minimize switching loss.
Lower standby power and higher conversion
efficiency is thus achieved.
VDD low startup current and low operating current
contribute to a reliable power on startup design with
OB2269C. A large value resistor could thus be used
in the startup circuit to minimize the standby power.
The internal slope compensation improves system
large signal stability and reduces the possible sub-
harmonic oscillation at high PWM duty cycle output.
Leading-edge blanking on current sense input
removes the signal glitch due to snubber circuit diode
reverse recovery. This greatly helps to reduce the
external component count and system cost in
application.
OB2269C offers complete protection coverage with
automatic self-recovery feature including Cycle-by-
Cycle current limiting (OCP), over load protection
(OLP), over temperature protection (OTP), VDD
over voltage protection (OVP) and under voltage
lockout (UVLO). The Gate-drive output is clamped
at 18V to protect the power MOSFET.
In OB2269C, OCP threshold slope is internally
optimized to reach constant output power limit over
universal AC input range.
Excellent EMI performance is achieved with On-
Bright proprietary frequency shuffling technique
together with soft switching control at the totem pole
gate drive output.
TYPICAL APPLICATION
Frequency Shuffling
The tone energy at below 20KHZ is minimized in
operation. Consequently, audio noise performance is
greatly improved.
OB2269C is offered in both SOP-8 and DIP-8
packages.
FEATURES
On-Bright Proprietary Frequency Shuffling
Technology for Improved EMI Performance
Extended Burst Mode Control For Improved
Efficiency and Minimum Standby Power Design
Audio Noise Free Operation
External Programmable PWM Switching
Frequency
Internal Synchronized Slope Compensation
Low VIN/VDD Startup Current(6.5uA) and Low
Operating Current (2.3mA)
Leading Edge Blanking on Current Sense Input
Complete Protection Coverage With Auto Self-
Recovery
o External Programmable Over Temperature
Protection (OTP)
o With or Without On-chip VDD OVP for
System OVP
o Under Voltage Lockout with Hysteresis
(UVLO)
o Gate Output Maximum Voltage Clamp (18V)
o Line Compensated Cycle-by-Cycle Over-
current Threshold Setting For Constant Output
Current Limiting Over Universal Input Voltage
Range (OCP)
o Over Load Protection. (OLP)
APPLICATIONS
Offline AC/DC flyback converter for
PC/TV/Set-Top Box Power Supplies
Open-frame SMPS
Battery Charger
©On-Bright Electronics
-1-
Confidential
OB_DOC_DS_69CC1



On-Bright Electronics
On-Bright Electronics

OB2269C Datasheet Preview

OB2269C Datasheet

Current Mode PWM Controller

No Preview Available !

OB2269C pdf
OB2269C
GENERAL INFORMATION
Pin Configuration
The OB2269C is offered in DIP and SOP packages
shown as below.
Ordering Information
Part Number
OB2269CAP
Description
With Frequency Shuffling,
DIP8, Pb-free
OB2269CAPV With Frequency Shuffling,
DIP8, Pb-free, no OVP
OB2269CCP
With Frequency Shuffling,
SOP8, Pb-free
OB2269CCPV With Frequency Shuffling,
SOP8, Pb-free, no OVP
Current Mode PWM ControllerFrequency Shuffling
Package Dissipation Rating
Package
DIP8
SOP8
RθJA (°C/W)
90
150
Absolute Maximum Ratings
Parameter
VDD/VIN DC Supply
Value
30 V
Voltage
VDD Zener Clamp
VoltageNote
VDD_Clamp+0.1V
VDD Clamp Continuous
10 mA
Current
VFB Input Voltage
VSENSE Input Voltage to Sense
Pin
-0.3 to 7V
-0.3 to 7V
VRT Input Voltage to RT Pin
VRI Input Voltage to RI Pin
Min/Max Operating Junction
-0.3 to 7V
-0.3 to 7V
-20 to 150 oC
Temperature TJ
Min/Max Storage
-55 to 150 oC
Temperature Tstg
Lead Temperature (Soldering, 260 oC
10secs)
Note: VDD_Clamp has a nominal value of 35V.
Stresses beyond those listed under “absolute maximum ratings”
may cause permanent damage to the device. These are stress
ratings only, functional operation of the device at these or any
other conditions beyond those indicated under “recommended
operating conditions” is not implied. Exposure to absolute
maximum-rated conditions for extended periods may affect device
reliability.
©On-Bright Electronics
-2-
Confidential
OB_DOC_DS_69CC1


Part Number OB2269C
Description Current Mode PWM Controller
Maker On-Bright Electronics
Total Page 13 Pages
PDF Download
OB2269C pdf
Download PDF File
OB2269C pdf
View for Mobile






Related Datasheet

1 OB2269 (OB2268 / OB2269) Current Mode PWM Controller Liteon
Liteon
OB2269 pdf
2 OB2269 Flyback switching power supply applications On-Bright Electronics
On-Bright Electronics
OB2269 pdf
3 OB2269C Current Mode PWM Controller On-Bright Electronics
On-Bright Electronics
OB2269C pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components