Absolute Maximum Ratings (Notes 1,
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (VCC)
Bias Voltage (VBB)
Input Voltage (VIN)
Storage Temperature Range (TSTG)
(Soldering, <10 sec.)
Human Body Model
-0.5V to VBB +0.5V
−65˚C to +150˚C
Operating Ranges (Note 2)
+130V to +180V
+7V to +13V
+0V to +4V
+15V to +175V
Refer to Figure 11
Do not operate the part without a heat sink.
(See Figure 3 for Test Circuit) Unless otherwise noted: VCC = +180V, VBB = +8V, CL = 8pF, TC = 50˚C. DC Tests: VIN =
2.5VDC. AC Tests: Output = 110VPP (55V - 165V) at 1MHz.
Min Typical Max
ICC Supply Current
All Three Channels, No Input Signal,
No Output Load
28 40 mA
DC Output Voltage
DC Output Voltage
DC Voltage Gain
All Three Channels
No AC Input Signal, VIN = 2.5VDC
No AC Input Signal, VIN = 1.2VDC
No AC Input Signal
(Note 4), No AC Input Signal
(Notes 4, 5), No AC Input Signal
15 22 mA
93 98 103 VDC
160 165 170 VDC
-50 -53 -56
tR Rise Time
tF Fall Time
(Note 6), 10% to 90%
(Note 6), 90% to 10%
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Note 2: Operating ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and
test conditions, see the Electrical Characteristics. Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may change when the device is not operated under the listed test
Note 3: All voltages are measured with respect to GND, unless otherwise specified.
Note 4: Calculated value from Voltage Gain test on each channel.
Note 5: Linearity Error is the variation in DC gain from VIN = 1.1V to VIN = 3.8V.
Note 6: Input from signal generator: tr, tf < 1 ns.