http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP1630V Datasheet

Pulse Width Modulator

No Preview Available !

MCP1630V pdf
MCP1630/MCP1630V
High-Speed, Microcontroller-Adaptable,
Pulse Width Modulator
Features
• High-Speed PWM Operation (12 ns Current
Sense to Output Delay)
• Operating Temperature Range:
- -40°C to +125°C
• Precise Peak Current Limit (±5%) (MCP1630)
• Voltage Mode and Average Current Mode Control
(MCP1630V)
• CMOS Output Driver (drives MOSFET driver or
low-side N-channel MOSFET directly)
• External Oscillator Input
(from PICmicro® Microcontroller (MCU))
• External Voltage Reference Input (for adjustable
voltage or current output application)
• Peak Current Mode Operation > 1 MHz
• Low Operating Current: 2.8 mA (typ.)
• Fast Output Rise and Fall Times: 5.9 ns and
6.2 ns
• Undervoltage Lockout (UVLO) Protection
• Output Short Circuit Protection
• Overtemperature Protection
Applications
• Intelligent Power Systems
• Smart Battery Charger Applications
• Multiple Output/Multiple Phase Converters
• Output Voltage Calibration
• AC Power Factor Correction
• VID Capability (programmed and calibrated by
PICmicro® microcontroller)
• Buck/Boost/Buck-Boost/SEPIC/Flyback/Isolated
Converters
• Parallel Power Supplies
Related Literature
• “MCP1630 NiMH Demo Board User’s Guide”,
Microchip Technology Inc., DS51505, 2004
• “MCP1630 Low-Cost Li-Ion Battery Charger
User’s Guide”, Microchip Technology Inc.,
DS51555, 2005
• “MCP1630 Li-Ion Multi-Bay Battery Charger
User’s Guide”, Microchip Technology Inc.,
DS51515, 2005
• “MCP1630 Dual Buck Demo Board User’s Guide”,
Microchip Technology Inc., DS51531, 2005
Description
The MCP1630/V is a high-speed Pulse Width Modula-
tor (PWM) used to develop intelligent power systems.
When used with a microcontroller unit (MCU), the
MCP1630/V will control the power system duty cycle to
provide output voltage or current regulation. The MCU
can be used to adjust output voltage or current, switch-
ing frequency, maximum duty cycle and other features
that make the power system more intelligent.
Typical applications include smart battery chargers,
intelligent power systems, brick dc/dc converters, ac
power-factor correction, multiple output power supplies,
multi-phase power supplies and more.
The MCP1630/V inputs were developed to be easily
attached to the I/O of a MCU. The MCU supplies the
oscillator and reference to the MCP1630/V to provide
the most flexible and adaptable power system. The
power system switching frequency and maximum duty
cycle are set using the I/O of the MCU. The reference
input can be external, a D/A Converter (DAC) output or
as simple as an I/O output from the MCU. This enables
the power system to adapt to many external signals
and variables in order to optimize performance and
facilitate calibration.
When operating in Current mode, a precise limit is set
on the peak current. With the fast comparator speed
(typically 12 ns), the MCP1630 is capable of providing a
tight limit on the maximum switch current over a wide
input voltage range when compared to other high-speed
PWM controllers.
For Voltage mode or Average Current mode
applications, the MCP1630V provides a larger range for
the external ramp voltage.
Additional protection features include: UVLO,
overtemperature and overcurrent.
Package Type
8-Lead DFN
(2 mm x 3 mm)
8-Lead MSOP
COMP 1
FB 2
CS 3
OSC IN 4
8 VREF
7 VIN
6 VEXT
5 GND
COMP 1
FB 2
CS 3
OSC IN 4
8 VREF
7 VIN
6 VEXT
5 GND
© 2005 Microchip Technology Inc.
DS21896B-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP1630V Datasheet

Pulse Width Modulator

No Preview Available !

MCP1630V pdf
MCP1630/MCP1630V
Functional Block Diagram – MCP1630
VIN
0.1 µA
OSC IN
VIN
MCP1630 High-Speed PWM
Overtemperature
UVLO
VIN
VEXT
Note
SQ
GND
0.1 µA
CS
COMP
+
Comp
R
Q
VIN
FB
VREF
EA
+
2R
R
2.7V Clamp
Note: During overtemperature, VEXT driver is high-impedance.
Latch Truth Table
SRQ
0 0 Qn
011
100
111
100 kΩ
DS21896B-page 2
© 2005 Microchip Technology Inc.


Part Number MCP1630V
Description Pulse Width Modulator
Maker Microchip
Total Page 26 Pages
PDF Download
MCP1630V pdf
Download PDF File
MCP1630V pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 MCP1630 Pulse Width Modulator Microchip Technology
Microchip Technology
MCP1630 pdf
2 MCP16301 High-Voltage Input Integrated Switch Step-Down Regulator Microchip
Microchip
MCP16301 pdf
3 MCP16301H High-Voltage Input Integrated Switch Step-Down Regulator Microchip
Microchip
MCP16301H pdf
4 MCP1630V Pulse Width Modulator Microchip
Microchip
MCP1630V pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components