·
14 Hits
• • • • • • • • • • • • • •
Complete UHF receiver on a monolithic chip Frequency range 300 to 440 MHz Typical range over 200 meters with monopole an...
·
9 Hits
■ 3.3V power supply ■ Complies with Bellcore, ITU/CCITT and ANSI specifications for applications such as OC-1, OC-3, OC-12, OC-48*, and ATM ■ Compatib...
·
8 Hits
DESCRIPTION
s Max. propagation delay of 1050ps s IEE min. of –60mA s Extended supply voltage option:
VEE = –4.2V to –5.5V s Voltage and temperature ...
·
8 Hits
a patent-pending isolation design that significantly improves on channel-tochannel crosstalk performance.
The SY89540U operates from a 2.5V ±5% supply...
·
7 Hits
a built-in pass transistor, precision programmable current limiting (±5%), and precision voltage termination (±0.75% over temperature). The MIC79110 p...
·
7 Hits
• Integrated switch with five MACs and five Fast Ethernet transceivers fully compliant to IEEE 802.3u standard • Shared memory based switch fabric wit...
·
7 Hits
• • • • • • 2.4V minimum laser compliance voltage Operation up to 2.5Gbps Modulation current up to 85mA Bias current up to 70mA Power monitoring Avail...
·
7 Hits
a decision threshold control that can be used for offset compensation or to optimize the Bit Error Rate (BER) in noisy applications as WDM where optic...
·
6 Hits
• Precision voltage monitor for 10% or 20% drop in 3.3V power supplies
• /RESET remains valid with VCC as low as 1V • 5µA supply current • 100ms minim...
·
6 Hits
• Compliant to USB power distribution specifications • Two completely independent switches • Integrated switching matrix supports ACPI S0/S3 state
tra...
·
6 Hits
The MIC2142 is a micropower boost switching regulator housed in a SOT23-5 package. The input voltage range is between 2.2V to 16V, making the device ...
·
6 Hits
the IttyBitty ™ SOT-23-5 package and SC-70 package. Supply voltage range is from ±2.5V to ±9V, allowing the MIC918 to be used in low-voltage circuits ...