logo
LM285

LM285 dataSheet

National Semiconductor

LM285 - Adjustable Micropower Voltage References

 · 3 Hits exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-...
Texas Instruments

LM2854 - 4-A 500-kHz / 1-MHz Synchronous Buck Regulator

 · 3 Hits •1 Input Voltage Range of 2.95 V to 5.5 V • Maximum Load Current of 4 A • Wide Bandwidth Voltage Mode Control Loop, Partial Internal Compensation • Fi...
National Semiconductor

LM285-1.2 - Micropower Voltage Reference Diode

 · 2 Hits n n n n n n n ± 1% and 2% initial tolerance Operating current of 10µA to 20mA 1Ω dynamic impedance Low temperature coefficient Low voltage reference ...
Texas Instruments

LM285-2.5-N - Micropower Voltage Reference Diode

 · 2 Hits 1 •2 ±20 mV (±0.8%) max. Initial Tolerance (A Grade) • Operating Current of 20 μA to 20 mA • 0.6Ω Dynamic Impedance (A Grade) • Low Temperature Coeffi...
ON Semiconductor

LM285 - Micropower Voltage Reference Diodes

 · 1 Hits • Operating Current from 10 mA to 20 mA • 1.0%, 1.5%, 2.0% and 3.0% Initial Tolerance Grades • Low Temperature Coefficient • 1.0 W Dynamic Impedance •...
TelCom Semiconductor Inc

LM285-1.2V - LOW POWER/ BANDGAP VOLTAGE REFERENCES

 · 1 Hits s s Output Tolerance ......... 1% or 2% Output Voltage Option LM285/385-1.2V 1....
Linear Technology

LM285-2.5 - Micropower Voltage Reference

 · 1 Hits s 20µA to 20mA Operating Range s Guaranteed 1% Initial Voltage Tolerance s Guaranteed 1Ω Dynamic Impedance s Very Low Power Consumption U APPLICATIO S...
TelCom Semiconductor Inc

LM285-2.5V - LOW POWER/ BANDGAP VOLTAGE REFERENCES

 · 1 Hits s s Output Tolerance ......... 1% or 2% Output Voltage Option LM285/385-1.2V 1....
TelCom Semiconductor Inc

LM285B-1.2V - LOW POWER/ BANDGAP VOLTAGE REFERENCES

 · 1 Hits s s Output Tolerance ......... 1% or 2% Output Voltage Option LM285/385-1.2V 1....
TelCom Semiconductor Inc

LM285B-2.5V - LOW POWER/ BANDGAP VOLTAGE REFERENCES

 · 1 Hits s s Output Tolerance ......... 1% or 2% Output Voltage Option LM285/385-1.2V 1....
National Semiconductor

LM285-2.5 - Micropower Voltage Reference Diode

 · 1 Hits exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM-185-2.5 ...
Calogic LLC

CLM2850 - 5.0A Low Dropout Voltage Regulator Adjustable

 · 1 Hits PRODUCT DESCRIPTION The Calogic CLM2850 is a low power 5A adjustable voltage regulator that is very easy to use. It requires only 2 external resistors...
National Semiconductor

LM2853 - synchronous SIMPLE SWITCHER buck regulator

 · 1 Hits n Input voltage range of 3.0V to 5.5V n Factory EEPROM set output voltages from 0.8V to 3.3V in 100 mV increments n Maximum load current of 3A n Volta...
National Semiconductor

LM2852 - 2A 500/1500kHz Synchronous SIMPLE SWITCHER Buck Regulator

 · 1 Hits internal, type-three compensation to deliver a low component count solution. The exposed-pad TSSOP-14 package enhances the thermal performance of the ...
Linear

LM285-1.2 - Micropower Voltage Reference

 · 1 Hits s 10µA to 20mA Operating Range s Guaranteed 1% Initial Voltage Tolerance s Guaranteed 1Ω Dynamic Impedance s Very Low Power Consumption U APPLICATIO S...
Texas Instruments

LM285-2.5 - Micropower Voltage Reference

 · 1 Hits •1 Operating Current Range 20 μA to 20 mA • 1.5% and 3% Initial Voltage Tolerance • Reference Impedance – LM385 1 Ω Maximum at 25°C – All Devices 1.5 ...
Texas Instruments

LM285-ADJ - Adjustable Micropower Voltage References

 · 1 Hits 1 •2 Adjustable from 1.24V to 5.30V • Operating Current of 10μA to 20mA • 1% and 2% Initial Tolerance • 1Ω Dynamic Impedance • Low Temperature Coeffic...
Texas Instruments

LM285-1.2-N - Micropower Voltage Reference Diode

 · 1 Hits 1 •2 ±1% and 2% Initial Tolerance • Operating Current of 10μA to 20mA • 1Ω Dynamic Impedance • Low Temperature Coefficient • Low Voltage Reference—1.2...
Texas Instruments

LM285-1.2 - Micropower Voltage References

 · 1 Hits •1 Operating Current Range – LM285-1.2: 10 μA to 20 mA – LM385-1.2: 15 μA to 20 mA – LM385B-1.2: 15 μA to 20 mA • 1% and 2% Initial Voltage Tolerance ...
Texas Instruments

LM2853 - 3-A 550-kHz Synchronous Buck Regulator

 · 1 Hits •1 Input Voltage Range of 3 V to 5.5 V • Factory EEPROM Set Output Voltages From 0.8 V to 3.3 V in 100 mV Increments • Maximum Load Current of 3A • Vo...
logo
Since 2006. D4U Semicon.   |   Contact Us   |   Privacy Policy