ATMEL Corporation AT4 Datasheet | Specifications & PDF Download

Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • – Single Cycle Reprogram (Erase and

(13 views)

Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • • – Single Cycle Reprogram (Erase an

(8 views)

Features • Single Voltage Read/Write Operation: 2.65V to 3.3V (BV), 3.0V to 3.6V (LV) • Access Time – 70 ns • Sector Erase Architecture • • • • • • •

(7 views)

Features • Single 2.7V - 3.6V Supply • Sequential Access, Parallel I/O Architecture • Page Program Operation • • • • • • • • • • – Single Cycle Reprog

(7 views)

Features • • • • • • • • • • • • • • 100% Compatible to AT45DB041 Single 2.5V - 3.0V or 2.7V - 3.6V Supply Serial Interface Architecture Page Program

(7 views)

Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • • – Single Cycle Reprogram (Erase an

(7 views)

Features • • • • • • • • • Supports PCMCIA PC Card Standard - Release 2.1 Directly connects to PCMCIA Connector No Additional Circuits Required 256

(6 views)

AT48801 Features • • • • • • • • • Compatible with MCS-51™ Products 8K bytes of On-Board Program Memory Fully Static Operation: 0 Hz to 16 MHz 256 x

(6 views)

Features • Complies with Intel Low-Pin Count (LPC) Interface Specification Revision 1.1 – Supports both Firmware Hub (FWH) and LPC Memory Read and Wri

(6 views)

Features • Single Voltage for Read and Write: 2.7V to 3.6V (BV), 3.0V to 3.6V (LV) • Fast Read Access Time - 120 ns • Internal Program Control and Tim

(5 views)

Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • – Single Cycle Reprogram (Erase and

(5 views)

AT48810 Features • • • • Designed for use with Atmel’s AT48802 Spread-Spectrum Signal Processor FCC Part 15, Unlicensed Operation RF Despreading and

(5 views)

Features • Single Voltage Operation – 5V Read – 5V Reprogramming • Fast Read Access Time - 45 ns • Internal Program Control and Timer • 8K word Boot B

(5 views)

www.DataSheet4U.com Features • • • • • • • • • • Single-voltage Operation Read/Write Operation: 2.7V to 3.6V (BV). 3.0V to 3.6V(LV) Fast Read Access

(5 views)

Features • • • • Single 2.7V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible 20 MHz Max Clock Frequency Page Program Operation – Single Cyc

(5 views)

Features • Single 2.7V to 3.6V Supply • RapidS® Serial Interface: 66 MHz Maximum Clock Frequency – SPI Compatible Modes 0 and 3 • User Configurable P

(5 views)

Features www.DataSheet4U.com • Single Voltage Read/Write Operation: 1.65V to 1.95V • Access Time – 80 ns • Sector Erase Architecture • • • • • • •

(5 views)

Atmel AT42QT2160 16-key QMatrix Touch Sensor IC DATASHEET Features  Number of keys:  up to 16 keys, and one slider (constructed from 2 to 8 keys) 

(5 views)

Features • Number of Keys: – Comms Mode: 1 to 12 keys (1 to 9 if wheel or slider option enabled) – Standalone Mode: 1 to 5 keys • Technology: – Patent

(5 views)

Features • • • • Single-voltage Read/Write Operation: 2.7V to 3.6V (BV), 3.0V to 3.6V (LV) Fast Read Access Time – 70 ns Internal Erase/Program Contro

(4 views)