Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • – Single Cycle Reprogram (Erase and

Features • Two Different IF Receiving Bandwidth Versions Are Available • • • • • • • • • • • • • • • (BIF = 300 kHz or 600 kHz) Frequency Receiving Ra

Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • • – Single Cycle Reprogram (Erase an

Features • Single 2.5V - 3.6V or 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible • 20 MHz Max Clock Frequency • Page Program Operati

Features • • • • • • • • • • • • • • 100% Compatible to AT45D021 Single 2.7V - 3.6V Supply Serial Interface Architecture Page Program Operation – Sing

Features • • • • Single 2.7V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible 20 MHz Max Clock Frequency Page Program Operation – Single Cyc

Features • • • • • • • • • • • • Single 2.5V - 3.6V or 2.7V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible 20 MHz Max Clock Frequency Page

www.DataSheet4U.com Features • 1.5 Gbps Bi-directional Transceiver – Compliant with Serial ATA Gen1 Revision 1.0a Specification • Low Power Operatio

Features • Single 2.5V or 2.7V to 3.6V Supply • RapidS® Serial Interface: 66 MHz Maximum Clock Frequency – SPI Compatible Modes 0 and 3 • User Config

Features • Single 2.5V - 3.6V or 2.7V - 3.6V Supply • RapidS™ Serial Interface: 66 MHz Maximum Clock Frequency – SPI Compatible Modes 0 and 3 • User

Features • Two Different IF Receiving Bandwidth Versions Are Available • • • • • • • • • • • • • • • (BIF = 300 kHz or 600 kHz) Frequency Receiving Ra

Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • • – Single Cycle Reprogram (Erase an

Features • • • • • • • • • • • • • • 100% Compatible to AT45D041 Single 4.5V - 5.5V Supply Serial Interface Architecture Page Program Operation – Sing

Features • Minimal External Circuitry Requirements, no RF Components on the PC Board Except • • • • • • • • • • • • Matching to the Receiver Antenna H

Features • Single 2.7V - 3.6V Supply • Sequential Access, Parallel I/O Architecture • Page Program Operation • • • • • • • • • • – Single Cycle Reprog

AT45DB081 Features • Single 2.7V - 3.6V Supply • Serial Interface Architecture • Page Program Operation • • • • • • • • • • – Single Cycle Reprogram (

www.DataSheet4U.com Features • Backscatter-based UHF RFID IC (860 Mhz to 960 Mhz) Supporting Current and Future • • • Radio Regulations Support for A

Features • Transparent RF Receiver ICs for 315 MHz (ATA5746) and 433.92 MHz (ATA5745) With • • High Receiving Sensitivity Fully Integrated PLL With Lo

Features • • • • • • • • • • • • • Two Different IF Receiving Bandwidth Versions are Available (BIF = 300 kHz or 600 kHz) 5V to 20V Automotive-Compati