·
140 Hits
Integrated WDT Reset Circuit [BD3020HFP]: Adjustable Detection Voltage through Vs pin [BD3021HFP]: WDT Can be Switched ON / OFF by Using INH Pin
L...
·
32 Hits
z Output Current: 500mA (Typ.) z Quick Start-Up: 50μs (Typ.) z Built-in Quick Discharge Circuit z Output Voltage Range:
0.9V~5.0V(selectable in 0.1V s...
·
11 Hits
a very low shutdown current (less than 1uA), an automatic soft-start mode to limit inrush current, as well as over current, over voltage and over temp...
·
9 Hits
Integrated WDT Reset Circuit [BD3020HFP-M]: Adjustable Detection Voltage through Vs pin [BD3021HFP-M]: WDT Can be Switched ON / OFF by Using INH Pin...
·
9 Hits
⚫ Maximum Output Current: 500mA (Within Maximum Power Dissipation)
⚫ Output voltage Range: from 1.5V to 5.0V in 0.1V Increments
⚫ Output Accuracy AT52...
·
8 Hits
include overcurrent protection, thermal shutdown, and Auto-discharge.
The TCR5BM series are offered in the ultra small plastic mold package DFN5B (1.2...
·
7 Hits
s s
DESCRIPTIO
s s s s
s s s s s
± 500mA Minimum Output Current Independent Adjustment of Source and Sink Current Limits 2% Current Limit Accuracy...
·
7 Hits
include charge current monitor, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.
Order Informa...
·
7 Hits
⚫ Maximum Output Current: 500mA (Within Maximum Power Dissipation)
⚫ Output voltage Range: from 1.5V to 5.0V in 0.1V Increments
⚫ Output Accuracy AT52...
·
6 Hits
s s s s s s s s
LT1795 Dual 500mA/50MHz Current Feedback Line Driver Amplifier DESCRIPTIO
The LT®1795 is a dual current feedback amplifier with high ...
·
6 Hits
Maximum 500mA peak output current Ultra Low Dropout Voltage
Typically 200mV at 500mA Output Current High Output Accuracy over Line, Load and
Tem...
·
6 Hits
High breakdown voltage (BV CEO ≥ 50V) High-current driving (Io(max) = –500mA) With output pulldown resistance (Driving available with fluorescent disp...