Datasheet4U Logo Datasheet4U.com

HEF40106B-Q100 - Hex inverting Schmitt trigger

General Description

The HEF40106B-Q100 provides six inverting buffers.

Each input has a Schmitt trigger circuit.

The inverting buffer switches at different points for positive-going and negative-going signals.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from 40 C to +85 C and from 40 C to +125 C.
  • Schmitt trigger input discrimination.
  • Fully static operation.
  • 5 V, 10 V, and 15 V parametric ratings.
  • Standardized symmetrical output characteristics.
  • ESD protection:.
  • MIL-STD-833, method 3015 exceeds 2000 V.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ).
  • Complies with JE.

📥 Download Datasheet

Other Datasheets by Nexperia

Part Number Description
HEF40106B Hex inverting Schmitt trigger
HEF4011B Quad 2-input NAND gate
HEF4011B-Q100 Quad 2-input NAND gate
HEF4013B Dual D-type flip-flop
HEF4013B-Q100 Dual D-type flip-flop
HEF4014B 8-bit static shift register
HEF4014B-Q100 8-bit static shift register
HEF4015B Dual 4-bit static shift register
HEF4016B Quad single-pole single-throw analog switch
HEF40175B Quad D-type flip-flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HEF40106B-Q100 Hex inverting Schmitt trigger Rev. 1 — 7 August 2012 Product data sheet 1. General description The HEF40106B-Q100 provides six inverting buffers. Each input has a Schmitt trigger circuit. The inverting buffer switches at different points for positive-going and negative-going signals. The difference between the positive voltage (VT+) and the negative voltage (VT) is defined as hysteresis voltage (VH). The HEF40106B-Q100 may be used for enhanced noise immunity or to “square up” slowly changing waveforms. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.