Datasheet4U Logo Datasheet4U.com

74HCT574-Q100 - Octal D-type flip-flop

This page provides the datasheet information for the 74HCT574-Q100, a member of the 74HC574-Q100 Octal D-type flip-flop family.

Description

The 74HC574-Q100; 74HCT574-Q100 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Input levels:.
  • For 74HC5.

📥 Download Datasheet

Datasheet preview – 74HCT574-Q100

Datasheet Details

Part number 74HCT574-Q100
Manufacturer nexperia
File Size 285.61 KB
Description Octal D-type flip-flop
Datasheet download datasheet 74HCT574-Q100 Datasheet
Additional preview pages of the 74HCT574-Q100 datasheet.

📁 Similar Datasheet

  • 74HCT574 - Octal D-type flip-flop (NXP)
  • 74HCT574 - Octal D-Type Flip-Flop (Texas Instruments)
  • 74HCT573 - Octal D-type transparent latch (NXP)
  • 74HCT533 - Octal D-type transparent latch (Philips)
  • 74HCT534 - Octal D-type flip-flop (Philips)
  • 74HCT540 - Octal buffer/line driver (Philips)
  • 74HCT540D - Octal Bus Buffer (Toshiba)
  • 74HCT541D - Octal Bus Buffer (Toshiba)
  • 74HCT5555 - Programmable delay timer (Philips)
  • 74HCT563 - Octal D-type transparent latch (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC574-Q100; 74HCT574-Q100 Octal D-type flip-flop; positive edge-trigger; 3-state Rev. 5 — 20 October 2022 Product data sheet 1. General description The 74HC574-Q100; 74HCT574-Q100 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Published: |