Datasheet4U Logo Datasheet4U.com

74AUP1G157-Q100 - Low-power 2-input multiplexer

Description

The 74AUP1G157-Q100 is a single 2-input multiplexer.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times.

This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 0.8 V to 3.6 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Overvoltage tolerant inputs to 3.6 V.
  • Low noise overshoot and undershoot < 10 % of VCC.
  • IOFF circuitry provides partial Power-down mode operation.
  • Low static power consumption; ICC = 0.9 µA.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AUP1G11 Low-power 3-input AND gate NXP
74AUP1G125 Low-power buffer/line driver NXP Semiconductors
74AUP1G125 SINGLE BUFFER GATE Diodes
74AUP1G126 Low-Power buffer/line driver NXP
74AUP1G126 SINGLE BUFFER GATE Diodes

Other Datasheets by Nexperia

Part Number Description
74AUP1G157 Low-power 2-input multiplexer
74AUP1G158 Low-power 2-input multiplexer
74AUP1G11 Low-power 3-input AND gate
74AUP1G125 Low-power buffer/line driver
74AUP1G125-Q100 Low-power buffer/line driver

Full PDF Text Transcription

Click to expand full text
74AUP1G157-Q100 Low-power 2-input multiplexer Rev. 2 — 4 November 2021 Product data sheet 1. General description The 74AUP1G157-Q100 is a single 2-input multiplexer. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |