Datasheet4U Logo Datasheet4U.com

74ALVC574 - Octal D-type flip-flop

Description

The 74ALVC574 is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications.

A clock input (CP) and an outputs enable input (OE) are common to all flip-flops.

Features

  • Wide supply voltage range from 1.65 V to 3.6 V.
  • 3.6 V tolerant inputs/outputs.
  • CMOS low power consumption.
  • Direct interface with TTL levels (2.7 V to 3.6 V).
  • Power-down mode.
  • Latch-up performance exceeds 250 mA.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8B (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM JESD22-A114E exceeds 2000 V.
  • MM JESD22.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVC574 Octal D-type flip-flop NXP
74ALVC541 Octal buffer / line driver NXP
74ALVC00 Low Voltage Quad 2-Input NAND Gate Fairchild Semiconductor
74ALVC00 Low Voltage Quad 2-Input NAND Gate ON Semiconductor
74ALVC02 Quad 2-input NOR gate NXP

Other Datasheets by nexperia

Part Number Description
74ALVC573 Octal D-type transparent latch
74ALVC541 Octal buffer/line driver
74ALVC541-Q100 Octal buffer/line driver
74ALVC00 Quad 2-input NAND gate
74ALVC00-Q100 Quad 2-input NAND gate

Full PDF Text Transcription

Click to expand full text
74ALVC574 Octal D-type flip-flop; positive edge-trigger; 3-state Rev. 3 — 30 April 2021 Product data sheet 1. General description The 74ALVC574 is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A clock input (CP) and an outputs enable input (OE) are common to all flip-flops. The eight flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW to HIGH CP transition. When pin OE is LOW, the contents of the eight flip-flops is available at the outputs. When pin OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Published: |