Datasheet4U Logo Datasheet4U.com

TPD2S017 - 2-Channel Ultra-Low Clamp Voltage ESD

General Description

The TPD2S017 is a two channel electrostatic discharge (ESD) protection device.

This protection product offers two-stage ESD transient voltage suppression (TVS) diodes in each line with a typically 1-Ω series resistor isolation.

Key Features

  • Ultra-low clamping voltage ensures the protection of ultra-low voltage core chipset during ESD events.
  • IEC 61000-4-2 ESD protection.
  • Matching of series resistor (R = 1 Ω) of ±8 mΩ (typical).
  • Differential channel input capacitance matching of 0.02 pF (typical).
  • High-speed data rate and EMI filter action at high frequencies (.
  • 3 dB bandwidth, ≉3 GHz).
  • Available in 6-Pin small-outline transistor [SOT-23 (DBV)] package.
  • Easy stra.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPD2004F 2-channel Squib Driver Toshiba Semiconductor
TPD2005F High-Side Power Switch Array Toshiba Semiconductor
TPD2007F Low-Side Power Switch Array Toshiba Semiconductor
TPD2015FN High-side switch Toshiba
TPD2017FN Low-side switch Toshiba

Other Datasheets by Texas Instruments

Part Number Description
TPD2S300 USB Type C Short-to-VBUS and IEC ESD Protector
TPD2S701-Q1 Automotive USB 2-Channel Data Line and IEC ESD Protection
TPD2S703-Q1 Automotive USB 2-Channel Data Line Short-to-Battery and IEC ESD Protection
TPD2E001 Low-Capacitance 2-Channel ESD-Protection
TPD2E001-Q1 Low-Capacitance 2-Channel ESD-Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPD2S017 SLLS949C – SEPTEMBER 2009 – REVISED JANUARY 2023 TPD2S017 2-Channel Ultra-Low Clamp Voltage ESD Solution With Series-Resistor Isolation 1 Features • Ultra-low clamping voltage ensures the protection of ultra-low voltage core chipset during ESD events • IEC 61000-4-2 ESD protection • Matching of series resistor (R = 1 Ω) of ±8 mΩ (typical) • Differential channel input capacitance matching of 0.