Datasheet4U Logo Datasheet4U.com

TCM1520A - Ring Detector

General Description

The TCM1520A is a monolithic ring-detection integrated circuit designed for use in isolated or nonisolated telephone applications.

The device uses a modified form of the Texas Instruments BIDFET† technology to combine low-voltage CMOS and high-voltage bipolar input/output circuitry.

Key Features

  • efficient high-voltage (40 V to 150 V) operation with a typical current drain of 1 mA. Phone Line AC Ring Signal TCM1520A Electronic Telephone or Accessory TTL /NMOS/CMOS Microprocessor During standby, the input impedance is approximately 1 MΩ or greater, which prevents any interference with parallel off-hook telephones transmitting DTMF or voice frequencies. The device achieves this high input impedance with an on-chip series zener diode that does not conduct until the voltage across AC INPUT.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ą TCM1520A RING DETECTOR ą SCTS005B − OCTOBER 1984 − REVISED DECEMBER 1990 • On-Chip 150-V Bridge Diode Configuration • Reliable BIDFET† Technology • High Standby Impedance . . . 1 MΩ Typ • Efficient High-Voltage Operation • Output Compatible With TTL, NMOS, and CMOS • Built-In 5-V Series Regulator • Built-In Lightning and Transient Protection D OR P PACKAGE (TOP VIEW) AC INPUT 1 INVERTING OUTPUT 2 COMMON 3 5-V OUTPUT 4 8 AC INPUT 7 COMMON 6 C FILTER 5 BELL TAPPING SENSE TCM1520A APPLICATION description The TCM1520A is a monolithic ring-detection integrated circuit designed for use in isolated or nonisolated telephone applications.