Datasheet4U Logo Datasheet4U.com

TB3R2 - QUAD DIFFERENTIAL PECL RECEIVERS

Download the TB3R2 datasheet PDF. This datasheet also covers the TB3R1 variant, as both devices belong to the same quad differential pecl receivers family and are provided as variant models within a single manufacturer datasheet.

General Description

These quad differential receivers accept digital data over balanced transmission lines.

They translate differential input logic levels to TTL output logic levels.

Key Features

  • 1.
  • Low-Voltage Functional Replacements for the Agere BRF1A, BRF2A, BRS2A, and BRS2B.
  • Pin-Equivalent to General Trade 26LS32 Devices.
  • High-Input Impedance Approximately 8 kΩ.
  • 3.5-ns Maximum Propagation Delay.
  • TB3R1 Provides 50-mV Hysteresis.
  • TB3R2 With -125-mV Threshold Offset for Preferred State Output.
  • -0.5-V to 5.2-V Common Mode Range.
  • Single 3.3 V ±10% Supply.
  • Slew Rate Limited (0.5 ns min 80% to 20%).
  • T.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TB3R1-etcTI.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Texas Instruments

Part Number Description
TB3R1 QUAD DIFFERENTIAL PECL RECEIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TB3R1, TB3R2 SLLS587C – NOVEMBER 2003 – REVISED JANUARY 2008 QUAD DIFFERENTIAL PECL RECEIVERS Check for Samples: TB3R1, TB3R2 FEATURES 1 • Low-Voltage Functional Replacements for the Agere BRF1A, BRF2A, BRS2A, and BRS2B • Pin-Equivalent to General Trade 26LS32 Devices • High-Input Impedance Approximately 8 kΩ • 3.5-ns Maximum Propagation Delay • TB3R1 Provides 50-mV Hysteresis • TB3R2 With -125-mV Threshold Offset for Preferred State Output • -0.5-V to 5.2-V Common Mode Range • Single 3.3 V ±10% Supply • Slew Rate Limited (0.