Datasheet4U Logo Datasheet4U.com

SN75DPHY440SS - CSI-2/DSI DPHY Re-timer

Description

The DPHY440 is a one to four lane and clock MIPI DPHY re-timer that regenerates the DPHY signaling.

The device complies with MIPI DPHY 1.1 standard and can be used in either a MIPI CSI-2 or MIPI DSI application at datarates of up to 1.5 Gbps.

Features

  • 1 MIPI DPHY 1.1 Specification compliant.
  • Enables low-cost cable solutions.
  • Supports up to 4 lanes at 1.5 Gbps.
  • CSI-2/DSI Clock rates from 100 MHz To 750 MHz.
  • Sub mW Power in shutdown state.
  • MIPI DSI Bi-directional LP mode supported.
  • Supports for both ULPS and LP power states.
  • Adjustable output voltage swing.
  • Selectable TX Pre-emphasis levels.
  • Adjustable Rx EQ to compensate for ISI loss.
  • Configurabl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN7500 Pulse Width Modulation KODENSHI
SN7500P Pulse Width Modulation KODENSHI
SN75173 Quad EIA-485 Line Receivers Motorola
SN75175 QUAD EIA-485 LINE RECEIVER Motorola
SN75175 Quad EIA-485 Line Receivers Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN75DP118 DisplayPort 1:1 Buffer
SN75DP119 DisplayPort 1:1 Signal Repeater and Signal Conditioner
SN75DP120 DisplayPort 1:1 Dual-Mode Repeater
SN75DP122A DisplayPort 1:2 Switch
SN75DP126 1:2 Re-Driver Switch

Full PDF Text Transcription

Click to expand full text
Product Folder Order Now Technical Documents Tools & Software Support & Community SN65DPHY440SS, SN75DPHY440SS SLLSEO9C – MARCH 2016 – REVISED AUGUST 2019 SNx5DPHY440SS CSI-2/DSI DPHY Re-timer 1 Features •1 MIPI DPHY 1.1 Specification compliant • Enables low-cost cable solutions • Supports up to 4 lanes at 1.
Published: |