Datasheet4U Logo Datasheet4U.com

SN74LVTH574 - 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS

General Description

These octal flip-flops are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

RGY Tape and reel

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
SN74LVTH574-EP 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN74LVTH573 3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCHES
SN74LVTH573-EP 3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCHES
SN74LVTH540 3.3-V ABT OCTAL BUFFERS/DRIVERS
SN74LVTH541 3.3-V ABT OCTAL BUFFERS/DRIVERS
SN74LVTH543 3.3-V ABT OCTAL REGISTERED TRANSCEIVERS
SN74LVTH543-EP 3.3-V ABT OCTAL REGISTERED TRANSCEIVERS
SN74LVTH125 3.3-V ABT QUADRUPLE BUS BUFFER
SN74LVTH125-EP 3.3-V ABT QUADRUPLE BUS BUFFER
SN74LVTH126 3.3-V ABT QUADRUPLE BUS BUFFER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54LVTH574, SN74LVTH574 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS SCBS688G − MAY 1997 − REVISED SEPTEMBER 2003 D Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) D Support Unregulated Battery Operation Down to 2.7 V D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D Ioff and Power-Up 3-State Support Hot Insertion D Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors D Latch-Up Performance Exceeds 500 mA Per JESD 17 D ESD Protection Exceeds JESD 22 − 2000-V Human-Body Model (A114-A) − 200-V Machine Model (A115-A) SN54LVTH574 . . . J OR W PACKAGE SN74LVTH574 . . .