Datasheet4U Logo Datasheet4U.com

SN74HCT74 - DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS

Description

The ’HCT74 devices contain two independent D-type positive-edge-triggered flip-flops.

A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.

Features

  • Operating voltage range of 4.5 V to 5.5 V.
  • Outputs can drive up to 10 LSTTL loads.
  • Low power consumption, 40-μA max ICC.
  • Typical tpd = 17 ns.
  • ±4-mA output drive at 5 V.
  • Low input current of 1 μA max.
  • Inputs are TTL-voltage compatible 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74HCT06 Hex Inverter Lingxing Microelectronics
SN74HC06 Hex Inverter Lingxing Microelectronics
SN74HC182 FUNCTION LOOK AHEAD CARRY GENERATOR ST Microelectronics
SN74HC423 DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR ST Microelectronics
SN74H74N Dual D-Type Flip-Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74HCT74D DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
SN74HCT74N DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
SN74HCT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATE
SN74HCT00D QUADRUPLE 2-INPUT POSITIVE-NAND GATE
SN74HCT00N QUADRUPLE 2-INPUT POSITIVE-NAND GATE

Full PDF Text Transcription

Click to expand full text
SN54HCT74, SN74HCT74 SCLS169G – DECEMBER 1982 – REVISED OCTOBER 2022 SNx4HCT74 Dual D-Type Positive-Edge-Triggered Flip-Flips With Clear and Preset 1 Features • Operating voltage range of 4.5 V to 5.5 V • Outputs can drive up to 10 LSTTL loads • Low power consumption, 40-μA max ICC • Typical tpd = 17 ns • ±4-mA output drive at 5 V • Low input current of 1 μA max • Inputs are TTL-voltage compatible 2 Description The ’HCT74 devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.
Published: |