Datasheet4U Logo Datasheet4U.com

SN74AVC16T245 - 16-Bit Dual-Supply Bus Transceiver

Description

This 16-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The SN74AVC16T245 device is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V.

The device is operational with VCCA/VCCB as low as 1.2 V.

Features

  • 1 Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage.
  • VCC Isolation Feature.
  • If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State.
  • Overvoltage-Tolerant Inputs and Outputs Allow Mixed-Voltage-Mode Data Communications.
  • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2 V to 3.6 V Power-Supply Range.
  • Ioff Supports Partial-Power-Down Mode Operation.
  • I/Os Are 4.6 V Tolerant.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AVC16T245-Q1 16-Bit Dual-Supply Bus Transceiver
SN74AVC16244 16-BIT BUFFER/DRIVER
SN74AVC16245 16-BIT BUS TRANSCEIVER
SN74AVC16334 16-BIT UNIVERSAL BUS DRIVER
SN74AVC16373 16-BIT TRANSPARENT D-TYPE LATCH

Full PDF Text Transcription

Click to expand full text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN74AVC16T245 SCES551E – FEBRUARY 2004 – REVISED NOVEMBER 2015 SN74AVC16T245 16-Bit Dual-Supply Bus Transceiver with Configurable Level-Shifting / Voltage Translation and Tri-State Outputs 1 Features •1 Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage • VCC Isolation Feature – If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State • Overvoltage-Tolerant Inputs and Outputs Allow Mixed-Voltage-Mode Data Communications • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2 V to 3.6 V Power-Supply Range • Ioff Supports Partial-Power-Down Mode Operation • I/Os Are 4.6 V Tolerant • Maximum Data Rates – 380 Mbps (1.8 V to 3.
Published: |