Datasheet4U Logo Datasheet4U.com

SN74AUP1T34 - 1-Bit Unidirectional Voltage-Level Translator

Description

The SN74AUP1T34 device is a 1-bit noninverting translator that uses two separate configurable powersupply rails.

It is a uni-directional translator from A to B.

The A port is designed to track VCCA.

Features

  • 1 Wide Operating VCC Range of 0.9 V to 3.6 V.
  • Balanced Propagation Delays: tPLH = tPHL (1.8-V to 3.3-V Translation Typical).
  • Low Static-Power Consumption: Maximum of 5-µA ICC.
  • ±6-mA Output Drive at 3 V.
  • Ioff Supports Partial Power-Down-Mode Operation.
  • VCC Isolation Feature.
  • If VCCA Input Is at GND, B Port Is in the High-Impedance state.
  • Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at Inpu.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AUP1T34-Q1 1-Bit Unidirectional Voltage-Level Translator
SN74AUP1T32 POSITIVE-OR GATE
SN74AUP1T00 POSITIVE-NAND GATE
SN74AUP1T02 POSITIVE-NOR GATE
SN74AUP1T04 INVERTER GATE

Full PDF Text Transcription

Click to expand full text
Product Folder Order Now Technical Documents Tools & Software Support & Community SN74AUP1T34 SCES841F – JUNE 2012 – REVISED APRIL 2018 SN74AUP1T34 1-Bit Unidirectional Voltage-Level Translator 1 Features •1 Wide Operating VCC Range of 0.9 V to 3.6 V • Balanced Propagation Delays: tPLH = tPHL (1.8-V to 3.
Published: |