Datasheet4U Logo Datasheet4U.com

SN74AC533 - OCTAL TRANSPARENT D-TYPE LATCHES

Description

The ’AC533 devices are octal transparent D-type latches with 3-state outputs.

When the latch-enable (LE) input is high, the Q outputs follow the complements of the data (D) inputs.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AC534 Octal Edge-Triggered D-Type Flip-Flops
SN74AC563 OCTAL D-TYPE TRANSPARENT LATCHES
SN74AC564 Octal D-Type Edge-Triggered Flip-Flops
SN74AC573 Octal D-type Transparent Latches
SN74AC574 Octal D-Type Edge-Triggered Flip-Flops

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54AC533, SN74AC533 OCTAL TRANSPARENT DĆTYPE LATCHES WITH 3ĆSTATE OUTPUTS SCAS555C − NOVEMBER 1995 − REVISED OCTOBER 2003 D 2-V to 6-V VCC Operation D Inputs Accept Voltages to 6 V D Max tpd of 10.5 ns at 5 V D 3-State Inverting Outputs Drive Bus Lines Directly D Full Parallel Access for Loading description/ordering information The ’AC533 devices are octal transparent D-type latches with 3-state outputs. When the latch-enable (LE) input is high, the Q outputs follow the complements of the data (D) inputs. When LE is taken low, the Q outputs are latched at the inverse logic levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state.
Published: |