Datasheet4U Logo Datasheet4U.com

SN74AC373 - OCTAL D-TYPE TRANSPARENT LATCHES

Description

These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads.

The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AC374 Octal D-Type Edge-Triggered Flip-Flops
SN74AC32 Quadruple 2-Input Positive-or Gates
SN74AC32-EP Quadruple 2-Input Positive-or Gates
SN74AC00 Quadruple 2-Input Positive-NAND Gates
SN74AC00D Quadruple 2-Input Positive-NAND Gates

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54AC373, SN74AC373 OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS SCAS540C – OCTOBER 1995 – REVISED SEPTEMBER 2002 D 2-V to 6-V VCC Operation D Inputs Accept Voltages to 6 V D Max tpd of 9.5 ns at 5 V D 3-State Noninverting Outputs Drive Bus Lines Directly D Full Parallel Access for Loading description/ordering information These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches are D-type transparent latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs.
Published: |