Download SN65LVDS31-EP Datasheet PDF
SN65LVDS31-EP datasheet preview
SN65LVDS31-EP page 2
Page 2
SN65LVDS31-EP page 3
Page 3

SN65LVDS31-EP Key Features

  • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
  • Typical Propagation Delay Times of 1.7 ns
  • Operate From a Single 3.3-V Supply
  • Power Dissipation 25 mW Typical Per Driver at
  • Driver at High Impedance When Disabled or
  • Bus-Terminal ESD Protection Exceeds 8 kV
  • Low-Voltage TTL (LVTTL) Logic Input Levels
  • Pin patible With AM26LS31, MC3487, and

Related Texas Instruments Datasheets

Part Number Description
SN65LVDS31 High-Speed Differential Line Drivers
SN65LVDS310 PROGRAMMABLE 27-BIT SERIAL-TO-PARALLEL RECEIVER
SN65LVDS311 PROGRAMMABLE 27-BIT DISPLAY SERIAL INTERFACE TRANSMITTER
SN65LVDS314 PROGRAMMABLE 27-BIT SERIAL-TO-PARALLEL RECEIVER
SN65LVDS315 Camera Parallel RGB to MIPI CSI-1 Serial Converter

SN65LVDS31-EP Description

The SN65LVDS31 is a differential line driver that implements the of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a...