Datasheet4U Logo Datasheet4U.com

SN65LVCP408 - Gigabit 8x8 CROSSPOINT SWITCH

Description

The SN65LVCP408 is a 8 × 8 non-blocking crosspoint switch in a flow-through pin-out allowing for ease in PCB layout.

VML signaling is used to achieve a high-speed data throughput while using low power.

Features

  • 1.
  • 23 Up to 4.25 Gbps Operation.
  • Non-Blocking Architecture Allows Each Output to be Connected to Any Input.
  • 30 ps of Deterministic Jitter.
  • Selectable Transmit Pre-Emphasis Per Lane.
  • Selectable Receive Equalization.
  • Available Packaging 64 Pin QFP.
  • Propagation Delay Times: 500 ps Typical.
  • Inputs Electrically Compatible With CML Signal Levels.
  • Operates From a Single 3.3-V Supply.
  • Ability to 3-STATE Outputs.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN65LVCP408 www.ti.com SLLS842A – JUNE 2009 – REVISED JUNE 2010 Gigabit 8 x 8 CROSSPOINT SWITCH Check for Samples: SN65LVCP408 FEATURES 1 •23 Up to 4.25 Gbps Operation • Non-Blocking Architecture Allows Each Output to be Connected to Any Input • 30 ps of Deterministic Jitter • Selectable Transmit Pre-Emphasis Per Lane • Selectable Receive Equalization • Available Packaging 64 Pin QFP • Propagation Delay Times: 500 ps Typical • Inputs Electrically Compatible With CML Signal Levels • Operates From a Single 3.3-V Supply • Ability to 3-STATE Outputs • Integrated Termination Resistors • I2C™ Control Interface DESCRIPTION The SN65LVCP408 is a 8 × 8 non-blocking crosspoint switch in a flow-through pin-out allowing for ease in PCB layout.
Published: |