Datasheet4U Logo Datasheet4U.com

SN55LBC175 - Quadruple Low-Power Differential Line Receiver

Description

The SN55LBC175 is a monolithic quadruple differential line receiver with 3-state outputs and is designed to meet the requirements of the EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11.

Features

  • high impedance, hysteresis for increased noise immunity, and sensitivity of ± 200 mV over a common-mode input voltage range of 12 V to.
  • 7 V. Fail-safe design ensures that if the inputs are open-circuited, the outputs are always high. This device is designed using the Texas Instruments proprietary LinBiCMOS™ technology allowing low power consumption, high switching speeds, and robustness. FK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN52010 2-Channel Speech Controller SONiX
SN52020 2-Channel Speech Controller SONiX
SN52709AL OPERATIONAL AMPLIFIERS ETC
SN531000 Solid State Relays Celduc
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia

Other Datasheets by Texas Instruments

Part Number Description
SN55LBC172 QUADRUPLE LOW-POWER DIFFERENTIAL LINE DRIVER
SN55LBC173 QUADRUPLE LOW-POWER DIFFERENTIAL RECEIVER
SN55LBC174 Quadruple Low-Power Differential Line Driver
SN55LBC176 Differential Bus Transceivers
SN55LBC180 LOW-POWER RS-485 LINE DRIVER AND RECEIVER PAIRS

Full PDF Text Transcription

Click to expand full text
SN55LBC175 QUADRUPLE LOW-POWER DIFFERENTIAL LINE RECEIVER D Meets EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11 D Designed to Operate With Pulse Durations as Short as 20 ns D Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments D Input Sensitivity . . . ± 200 mV D Low-Power Consumption . . . 20 mA Max D Open-Circuit Fail-Safe Design D Common-Mode Input Voltage Range of – 7 V to 12 V SGLS083A – MARCH 1995 – REVISED JUNE 2000 J OR W PACKAGE (TOP VIEW) 1B 1 1A 2 1Y 3 1, 2EN 4 2Y 5 2A 6 2B 7 GND 8 16 VCC 15 4B 14 4A 13 4Y 12 3, 4EN 11 3Y 10 3A 9 3B description The SN55LBC175 is a monolithic quadruple differential line receiver with 3-state outputs and is designed to meet the requirements of the EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11.
Published: |