Datasheet4U Logo Datasheet4U.com

SN54HCT541 - OCTAL BUFFERS AND LINE DRIVERS

Description

These octal buffers and line drivers are designed to have the performance of the popular ’HC240 series devices and to offer a pinout with inputs and outputs on opposite sides of the package.

This arrangement greatly facilitates printed circuit board layout.

Features

  • Operating voltage range of 4.5 V to 5.5 V.
  • High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads.
  • Low power consumption, 80-µA max ICC.
  • Typical tpd = 12 ns.
  • ±6-mA output drive at 5 V.
  • Low input current of 1 µA max.
  • Inputs are TTL-voltage compatible.
  • Data flow-through pinout (all inputs on opposite side from outputs) 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54HCT540 OCTAL BUFFERS AND LINE DRIVERS
SN54HCT573 OCTAL TRANSPARENT D-TYPE LATCHES
SN54HCT574 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HCT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATE
SN54HCT02 QUADRUPLE 2-INPUT POSITIVE-NOR GATE

Full PDF Text Transcription

Click to expand full text
SN54HCT541, SN74HCT541 SCLS306E – JANUARY 1996 – REVISED MAY 2022 SNx4HCT541 Octal Buffers and Line Drivers With 3-State Outputs 1 Features • Operating voltage range of 4.5 V to 5.5 V • High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads • Low power consumption, 80-µA max ICC • Typical tpd = 12 ns • ±6-mA output drive at 5 V • Low input current of 1 µA max • Inputs are TTL-voltage compatible • Data flow-through pinout (all inputs on opposite side from outputs) 2 Description These octal buffers and line drivers are designed to have the performance of the popular ’HC240 series devices and to offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout.
Published: |