Datasheet4U Logo Datasheet4U.com

ONET1191P - 11.3-Gbps Limiting Amplifier

Description

The ONET1191P is a high-speed, 3.3-V limiting amplifier for copper-cable and fiber-optic applications with data rates up to 11.3 Gbps.

This device provides a gain of about 40 dB which ensures a fully differential output swing for input signals as low as 5 mVpp.

Features

  • Up to 11.3-Gbps Operation.
  • Loss-of-Signal Detection (LOS).
  • Adjustable Output Voltage.
  • Low Power Consumption.
  • Input Offset Cancellation.
  • CML Data Outputs With On-Chip, 50-Ω Back-Termination to VCC.
  • Single 3.3 V Supply.
  • Surface-Mount, Small-Footprint, 3-mm × 3-mm, 16-Pin QFN Package.

📥 Download Datasheet

📁 Similar Datasheet

  • ONE2 - CMOS Gate Array (AMI)
  • ONE4 - CMOS Gate Array (AMI)
  • ONE6 - CMOS Gate Array (AMI)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
ONET1191P www.ti.com 11.3-Gbps Limiting Amplifier SLLS754 – SEPTEMBER 2006 FEATURES • Up to 11.3-Gbps Operation • Loss-of-Signal Detection (LOS) • Adjustable Output Voltage • Low Power Consumption • Input Offset Cancellation • CML Data Outputs With On-Chip, 50-Ω Back-Termination to VCC • Single 3.3 V Supply • Surface-Mount, Small-Footprint, 3-mm × 3-mm, 16-Pin QFN Package APPLICATIONS • 10 Gigabit Ethernet Optical Transmitters • 8× and 10× Fibre Channel Optical Transmitters • SONET OC-192/SDH-64 Optical Transmitters • XFP and SFP+ Transceiver Modules • XENPAK, XPAK, X2 and 300-Pin MSA Transponder Modules • Cable Driver and Receiver DESCRIPTION The ONET1191P is a high-speed, 3.3-V limiting amplifier for copper-cable and fiber-optic applications with data rates up to 11.3 Gbps.
Published: |