Datasheet4U Logo Datasheet4U.com

LVC245A - Octal Bus Transceiver

General Description

These octal bus transceivers are designed for 1.65-V to 3.6-V VCC operation.

The ’LVC245A devices are designed for asynchronous communication between data buses.

Key Features

  • 1 Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 6.3 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C.
  • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C.
  • Ioff Supports Live Insertion, Partial-Power-Down Mode and Back Drive protection.
  • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Latch-Up Performanc.

📥 Download Datasheet

More Datasheets from Texas Instruments

Part Number Description
LVC240A Octal Buffer/Driver
LVC244A Octal Buffer/Driver
LVC244AQ OCTAL BUFFER/DRIVER
LVC2244A Octal Buffer/Driver
LVC257A Quadruple 2-Line to 1-Line Data Selectors/Multiplexers
LVC00A Quadruple 2-Input Positive-NAND Gate
LVC02A QUADRUPLE 2-INPUT POSITIVE-NOR GATE
LVC02AM QUADRUPLE 2-INPUT POSITIVE-NOR GATE
LVC02AQ QUADRUPLE 2-INPUT POSITIVE-NOR GATE
LVC04A Hex Inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN74LVC245A SCAS218X – JANUARY 1993 – REVISED JANUARY 2015 SN74LVC245A Octal Bus Transceiver With 3-State Outputs 1 Features •1 Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.3 ns at 3.3 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C • Ioff Supports Live Insertion, Partial-Power-Down Mode and Back Drive protection • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.