Datasheet4U Logo Datasheet4U.com

LVC06AM - HEX INVERTER BUFFERS/DRIVERS

General Description

The SN74LVC06A is a hex inverter buffer/driver that is designed for 1.65-V to 3.6-V VCC operation.

The outputs of the SN74LVC06A device are open drain and can be connected to other open-drain outputs to implement active low wired OR or active high wired AND functions.

Key Features

  • Controlled Baseline.
  • One Assembly Site.
  • One Test Site.
  • One Fabrication Site.
  • Extended Temperature Performance of.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product Change Notification.
  • Qualification Pedigree (1).
  • Operates From 1.65 V to 3.6 V.
  • Inputs and Open Drain Outputs Accept Voltages up to 5.5 V.
  • Max tpd of 3.7 ns at 3.3 V.
  • Ioff Support.

📥 Download Datasheet

More Datasheets from Texas Instruments

Part Number Description
LVC06A HEX INVERTER BUFFERS/DRIVERS
LVC06AQ HEX INVERTER BUFFERS/DRIVERS
LVC00A Quadruple 2-Input Positive-NAND Gate
LVC02A QUADRUPLE 2-INPUT POSITIVE-NOR GATE
LVC02AM QUADRUPLE 2-INPUT POSITIVE-NOR GATE
LVC02AQ QUADRUPLE 2-INPUT POSITIVE-NOR GATE
LVC04A Hex Inverter
LVC08A Quadruple 2-Input Positive-AND Gate
LVC125A Quadruple Bus Buffer Gate
LVC2244A Octal Buffer/Driver

Full PDF Text Transcription for LVC06AM (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for LVC06AM. For precise diagrams, tables, and layout, please refer to the original PDF.

www.ti.com FEATURES • Controlled Baseline – One Assembly Site – One Test Site – One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Dimin...

View more extracted text
• Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product Change Notification • Qualification Pedigree (1) • Operates From 1.65 V to 3.6 V • Inputs and Open Drain Outputs Accept Voltages up to 5.5 V • Max tpd of 3.7 ns at 3.3 V • Ioff Supports Partial Power Down Mode Operation • Latch-Up Performance Exceeds 250 mA Per JESD 17 (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.