Datasheet4U Logo Datasheet4U.com

LP5922 - Adjustable LDO

General Description

The LP5922 is 2-A low dropout (LDO) linear regulator with 200-mV typical dropout voltage at maximum current levels.

The LP5922 device can operate from a voltage rail down to 1.3 V without additional bias supply.

Key Features

  • 1 Wide Input Voltage Range: 1.3 V to 6 V.
  • Low VIN Voltage Without Extra Bias Voltage.
  • Adjustable Output Voltage: 0.5 V to 5 V.
  • Low Dropout: 200 mV at 2-A Load.
  • Low Output Voltage Noise: 25 μVRMS.
  • Output Current: 2 A.
  • 40˚C to +125°C Operating Junction Temperature.
  • Programmable Soft Start Limits Inrush Current.
  • 3-mm × 3-mm × 0.75-mm 10-Pin WSON Package.
  • Thermal-Overload and Short-Circuit Protection.

📥 Download Datasheet

More Datasheets from Texas Instruments

Part Number Description
LP5900 Ultra-Low-Noise LDO
LP5904 Linear Regulator
LP5907 Low-noise LDO
LP5907-Q1 Low-noise LDO
LP5910 Low-noise LDO
LP5912 Low-noise LDO
LP5912-Q1 Low-noise LDO
LP5951 Low-Dropout CMOS Voltage Regulator
LP5952 Dual-Rail Linear Regulator
LP5990 Low Dropout Voltage Regulator

Full PDF Text Transcription for LP5922 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for LP5922. For precise diagrams, tables, and layout, please refer to the original PDF.

Product Folder Order Now Technical Documents Tools & Software Support & Community LP5922 SNVSAG0A – NOVEMBER 2016 – REVISED FEBRUARY 2017 LP5922 2-A Low-Noise, Adjustable...

View more extracted text
NOVEMBER 2016 – REVISED FEBRUARY 2017 LP5922 2-A Low-Noise, Adjustable LDO With Low Input- and Output-Voltage Capability 1 Features •1 Wide Input Voltage Range: 1.3 V to 6 V • Low VIN Voltage Without Extra Bias Voltage • Adjustable Output Voltage: 0.5 V to 5 V • Low Dropout: 200 mV at 2-A Load • Low Output Voltage Noise: 25 μVRMS • Output Current: 2 A • –40˚C to +125°C Operating Junction Temperature • Programmable Soft Start Limits Inrush Current • 3-mm × 3-mm × 0.75-mm 10-Pin WSON Package • Thermal-Overload and Short-Circuit Protection • Output Voltage Tolerance: ±1.5% • Shutdown Supply Current : 0.