Datasheet4U Logo Datasheet4U.com

DRV8841 - Dual H-Bridge Driver

General Description

The DRV8841 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications.

The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads.

Key Features

  • 1 Dual H-Bridge DC Motor Driver.
  • Single and Dual Brushed DC.
  • Stepper.
  • PWM Control Interface.
  • Optional Fixed Frequency Current Regulation.
  • Two Bit Current Control Allows Up to Four Current Levels.
  • Low MOSFET On-Resistance.
  • 2.5-A Maximum Drive Current at 24 V and TA = 25°C.
  • Combined 400 mΩ RDS(ON) of High-Side and Low-Side at 24 V and TA = 25°C.
  • 8.2-V to 45-V Operating Supply Voltage Range.
  • Low Curre.

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
DRV8840 DC Motor Driver
DRV8842 DC Motor Driver
DRV8842-EP DC Motor Driver
DRV8843 Dual H-Bridge Driver
DRV8844 1/2-H-Bridge Driver
DRV8846 Dual H-Bridge Stepper Motor Driver
DRV8847 Dual H-Bridge Motor Driver
DRV8848 Dual H-Bridge Motor Driver
DRV8800 DMOS Full-Bridge Motor Drivers
DRV8801 DMOS Full-Bridge Motor Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community DRV8841 SLVSAC0F – MAY 2010 – REVISED DECEMBER 2015 DRV8841 Dual H-Bridge Driver IC 1 Features •1 Dual H-Bridge DC Motor Driver – Single and Dual Brushed DC – Stepper • PWM Control Interface • Optional Fixed Frequency Current Regulation – Two Bit Current Control Allows Up to Four Current Levels • Low MOSFET On-Resistance – 2.5-A Maximum Drive Current at 24 V and TA = 25°C – Combined 400 mΩ RDS(ON) of High-Side and Low-Side at 24 V and TA = 25°C • 8.2-V to 45-V Operating Supply Voltage Range • Low Current Sleep Mode • Built-In 3.