Datasheet4U Logo Datasheet4U.com

DRV8411A - Dual H-Bridge Motor Driver

General Description

The DRV8411A is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads.

The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and lowbattery conditions.

Key Features

  • Dual H-bridge motor driver, can drive -.
  • One bipolar stepper motor.
  • One or two brushed DC motors.
  • Solenoids and other inductive loads.
  • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C).
  • Wide Power Supply Voltage Range.
  • 1.65 to 11 V.
  • Pin-to-pin compatible with -.
  • DRV8833: 360-mΩ/bridge.
  • DRV8833C: 1735-mΩ/bridge.
  • DRV8847: 1000-mΩ/bridge.
  • DRV8410: 800-mΩ/bridge.
  • DRV8411: 400-mΩ/br.

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
DRV8412 Dual Full-Bridge PWM Motor Driver
DRV8402 Dual Full Bridge PWM Motor Driver
DRV8432 Dual Full-Bridge PWM Motor Driver
DRV8452 5A Stepper Motor Driver
DRV8145-Q1 Automotive Half Bridge Driver
DRV8212 11-V H-Bridge Motor Driver
DRV8231 3.7-A Brushed DC Motor Driver
DRV8251 4.1-A Brushed DC Motor Driver
DRV8262 Single or Dual H-Bridge Motor Driver
DRV8301 Three-Phase Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DRV8411A SLVSGI9A – OCTOBER 2022 – REVISED JULY 2023 DRV8411A Dual H-Bridge Motor Driver with Current Regulation 1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DRV8833: 360-mΩ/bridge – DRV8833C: 1735-mΩ/bridge – DRV8847: 1000-mΩ/bridge – DRV8410: 800-mΩ/bridge – DRV8411: 400-mΩ/bridge • High output current capability: 4-A Peak • PWM control interface • Supports 1.8-V, 3.