Datasheet4U Logo Datasheet4U.com

ZXLD1362 - 1A LED driver

Description

The ZXLD1362 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.

Features

  • Simple low parts count Internal 60V NDMOS switch Up to 1A output current Single pin on/off and brightness control using DC voltage or PWM PWM resolution up to 3000:1 Soft start capability High efficiency (up to 95%) Wide input voltage range: 6V to 60V 65V transient capability Low power shutdown Up to 1MHz switching frequency Inherent open-circuit LED protection Typica.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ZXLD1362 60V 1A LED DRIVER Diodes
ZXLD1360 30V 1A LED DRIVER Diodes
ZXLD1360Q AUTOMOTIVE GRADE 30V 1A LED DRIVER Diodes
ZXLD1366 60V LED DRIVER Diodes
ZXLD1366Q 60V LED DRIVER Diodes

Other Datasheets by Zetex (Diodes Incorporated)

Part Number Description
ZXLD1360 1A LED driver
ZXLD1320 Buck mode DC-DC converter
ZXLD1321 Buck mode DC-DC converter
ZXLD1322 Buck/boost mode DC-DC converter
ZXLD1350 350mA LED driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr ZXLD1362 1A LED driver with internal switch Description The ZXLD1362 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 60V and provides an externally adjustable output current of up to 1A. Depending upon supply voltage and external components, this can provide up to 48 watts of output power. The ZXLD1362 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be adjusted above, or below the set value, by applying an external control signal to the 'ADJ' pin.
Published: |