Datasheet4U Logo Datasheet4U.com

ZXLD1356 - 60V 550mA LED DRIVER and AUTOMOTIVE GRADE

Description

The ZXLD1356 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.

Features

  • Typically better than 0.8% output current accuracy.
  • Simple and with low part count.
  • Single pin on/off and brightness control using DC voltage or PWM.
  • PWM resolution up to 1000:1.
  • High efficiency (up to 97%).
  • Wide input voltage range: 6V to 60V.
  • Inherent open-circuit LED protection.
  • Available in thermally enhanced packages o DFN3030-6 θJA 44° C/W o TSOT23-5 θJA 82° C/W.
  • Available in Green molding (no Br, Sb) with le.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ZXLD1356Q AUTOMOTIVE GRADE 60V 550mA LED DRIVER Diodes
ZXLD1350 30V 350mA LED DRIVER Diodes
ZXLD1350Q AUTOMOTIVE GRADE 350mA BUCK LED DRIVER Diodes
ZXLD1360 30V 1A LED DRIVER Diodes
ZXLD1360Q AUTOMOTIVE GRADE 30V 1A LED DRIVER Diodes

Other Datasheets by Zetex (Diodes Incorporated)

Part Number Description
ZXLD1350 350mA LED driver
ZXLD1352 350mA LED driver
ZXLD1320 Buck mode DC-DC converter
ZXLD1321 Buck mode DC-DC converter
ZXLD1322 Buck/boost mode DC-DC converter

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr A Product Line of Diodes Incorporated ZXLD1356 60V 550mA LED DRIVER with AEC-Q100 Description The ZXLD1356 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 60V and provides an externally adjustable output current of up to 550mA. Depending upon supply voltage and external components, this can provide up to 30 watts of output power. The ZXLD1356 has been qualified to AECQ100 Grade 1 enabling operation in ambient temperatures from -40 to 125°C Output current can be adjusted above, or below the set value, by applying an external control signal to the 'ADJ' pin.
Published: |