Datasheet4U Logo Datasheet4U.com

ZNBR6001 - FET BIAS CONTROLLER

Description

The ZNBR series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR, cellular telephones etc.

with a minimum of external components and a VCC of 3-6V for improved efficiency.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ZNBG4003 4 STAGE FET LNA BIAS CONTROLLER Diodes Incorporated
ZNBT-60-1W Bias-Tee Wideband/ 2.5 to 6000 MHz Mini-Circuits

Other Datasheets by Zetex (Diodes Incorporated)

Part Number Description
ZNBR6001Q20 FET BIAS CONTROLLER
ZNBR6000 FET BIAS CONTROLLER
ZNBR6000Q20 FET BIAS CONTROLLER
ZNBR4000 FET BIAS CONTROLLER
ZNBR4000Q16 FET BIAS CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FET BIAS CONTROLLER DRAFT ISSUE A - DECEMBER 2000 DEVICE DESCRIPTION The ZNBR series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR, cellular telephones etc. with a minimum of external components and a VCC of 3-6V for improved efficiency. With the addition of two capacitors and resistors the devices provide drain voltage and current control for a number of external grounded source FETs, generating the regulated negative rail required for FET gate biasing whilst operating from a single supply. This negative bias, at -3 volts, can also be used to supply other external circuits. The ZNBR4000/1 and ZNBR6000/1 contain four and six bias stages respectively.
Published: |