Datasheet4U Logo Datasheet4U.com

NWK914D - PHY/PMD High Speed Copper Media Transceiver

Description

The functional blocks within the device are shown in Fig.

3.

These are described below:NRZ to MLT3 Encoder The serial data from the shifter then passes through an encoder which converts the NRZI binary data into the three level MLT-3 format for transmission by the 'TXO' outputs.

Features

  • s Compatible with IEEE-802.3 Standards s Operates over 100 Meters of STP and Category 5 UTP cable s Five Bit TTL Level Symbol Interface s Integrated Clock and Data Recovery s Supports Full-duplex Operation s Integral 10 Mb/s Buffer for Dual 10 Mb/s & 100 Mb/s.

📥 Download Datasheet

Datasheet Details

Part number NWK914D
Manufacturer Zarlink Semiconductor
File Size 173.94 KB
Description PHY/PMD High Speed Copper Media Transceiver
Datasheet download datasheet NWK914D Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NWK914D PHY/PMD High Speed Copper Media Transceiver Mitel Networks
NWK914CG PHY/PMD High Speed Copper Media Transceiver Mitel Networks
NWK914GP1N PHY/PMD High Speed Copper Media Transceiver Mitel Networks
NWK933 3.3V 10/100 Fast Ethernet Transceiver to MII Mitel Networks
NWK933CG 3.3V 10/100 Fast Ethernet Transceiver to MII Mitel Networks

Other Datasheets by Zarlink Semiconductor

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com NWK914D NWK914D PHY/PMD High Speed Copper Media Transceiver Preliminary Information DS4829 - 1.1 December 1997 The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications. The device connects through a 5 bit symbol interface directly with any MAC controller that includes the PCS layer, resulting in a simple and cost effective solution. It will also interface with a PCS device such as the NWK935 to form a complete 100BASE-TX Physical Layer for connection to the IEEE 802.3 standard MII interface.
Published: |